SKF Nitrile Rubber (NBR) Seal, 25 mm ID, 37 mm OD, 6 mm
- RS 제품 번호:
- 266-9034
- 제조사 부품 번호:
- 25X37X6 HMSA10 RG
- 제조업체:
- SKF
Subtotal (1 pack of 10 units)*
₩20,398.00
재고있음
- 추가로 2026년 3월 23일 부터 20 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩2,039.80 | ₩20,390.48 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 266-9034
- 제조사 부품 번호:
- 25X37X6 HMSA10 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Seal | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 6mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Seal | ||
Seal Type Rotary Shaft Seal | ||
Thickness 6mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Seal, 25mm Inside Diameter, 6mm Thickness - 25X37X6 HMSA10 RG
This seal is a rotary shaft sealing solution designed to separate rotating and stationary parts in machinery, preventing lubricant loss and contamination ingress. It features a rubber outer profile with a single main sealing lip and an auxiliary non‑contacting lip to maintain effective exclusion of dirt and minimise leakage in polluted environments.
Features & Benefits
• Garter spring maintains consistent lip contact and sealing force
• Auxiliary lip improves contamination exclusion in dusty conditions
• Nitrile rubber compound resists oil and grease exposure
• Accommodates shaft misalignment to reduce wear
• Permits circumferential speed up to 5.03 m/s for moderate rpm usage
• Auxiliary lip improves contamination exclusion in dusty conditions
• Nitrile rubber compound resists oil and grease exposure
• Accommodates shaft misalignment to reduce wear
• Permits circumferential speed up to 5.03 m/s for moderate rpm usage
Applications
• Suitable for automation gearboxes requiring oil retention
• Ideal for electrical motor shafts in industrial equipment
• Used with bearings in mechanical drive assemblies
• Can be used for maintenance replacement in rotating housings
• Ideal for electrical motor shafts in industrial equipment
• Used with bearings in mechanical drive assemblies
• Can be used for maintenance replacement in rotating housings
What temperature range can it operate within?
It supports continuous service from −40°C to 100°C and short peaks to 120°C.
What rotational speed limits should be observed?
Maximum rotational speed is 3,840 r/min, corresponding to a circumferential speed ceiling of 5.03 m/s.
How does the seal handle pressure differences?
The design tolerates a pressure differential of 0.03 N/mm, suitable for low‑pressure sealing applications.
What outer construction aids installation in housings?
The outside diameter is rubber with metal reinforcement to ensure secure seating in the bore.
Which shaft and bore sizes is it intended for replacement use with?
It is matched to a 25mm shaft and a 37mm housing bore with a 6mm section width.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 25 mm ID, 37 mm OD, 5 mm
- SKF Nitrile Rubber (NBR) Seal, 25 mm ID, 37 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 37 mm ID, 50 mm OD, 6 mm
- SKF Nitrile Rubber (NBR) Seal, 26 mm ID, 37 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 17 mm ID, 37 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 27 mm ID, 37 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 20 mm ID, 37 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 24 mm ID, 37 mm OD, 7 mm