Druck PTXPRESSX Series Pressure Sensor 0 bar 10 bar

Subtotal (1 unit)*

₩584,580.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 11월 23일 부터 7 개 단위 배송
  • 추가로 2026년 11월 25일 부터 5 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩584,580.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
265-5847
제조사 부품 번호:
PTXPRESSX 10
제조업체:
Druck
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Druck

Product Type

Pressure Sensor

Maximum Pressure Measurement

10bar

Minimum Pressure Measurement

0bar

Accuracy

±0.04 %

Analogue Output

4 → 20 mA

Maximum Supply Voltage

32V

Series

PTXPRESSX

Standards/Approvals

CE, DIN 43650, UKCA

Output Type

Analogue

IP Rating

IP67, IP65

Maximum Operating Temperature

80°C

Media Measured

Fluids

COO (Country of Origin):
GB

Druck PTXPRESSX Series Pressure Sensor, 0 to 10 bar Pressure Range, 4 to 20mA analogue Output - PTXPRESSX 10


This pressure sensor measures fluid pressure and provides an industry-standard analogue signal for monitoring and control in demanding environments. It operates across a 0 to 10 bar range and accepts supply voltages up to 32 V, making it suitable for integration with industrial control systems. The device is designed for use where environmental protection and thermal endurance are required.

Features and Benefits:


• High-accuracy ±0.04% reduces measurement uncertainty
• Analogueue 4 to 20 mA output simplifies signal transmission
• IP67 and IP65 ingress protection enables outdoor installation
• Maximum operating temperature 80°C supports elevated process temperatures
• CE and DIN 43650 approvals ease system integration

Applications


• Suitable for hydraulic system pressure monitoring
• Ideal for process plant fluid measurement loops
• Used with PLC input modules for continuous control
• Can be used for pump and compressor protection
• Suitable for industrial test rigs and calibration benches

What is the maximum supply voltage it accepts?


It accepts a maximum supply voltage of 32 V.

Which media is compatible with this sensor?


It is designed to measure fluids.

What approvals support regulatory acceptance?


It carries CE and DIN 43650 approvals and is UKCA compliant.

How does ingress protection vary with installation?


It is rated IP67 for temporary immersion and IP65 for dust and water jets, allowing selection based on mounting conditions.

What operating temperature can be expected during continuous use?


It is specified for operation up to 80°C.

관련된 링크들