Druck PTXPRESSX Series Pressure Sensor 0 bar 1 bar

Subtotal (1 unit)*

₩571,540.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 11월 23일 부터 1 개 단위 배송
  • 추가로 2026년 12월 09일 부터 3 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩571,540.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
265-5845
제조사 부품 번호:
PTXPRESSX 4
제조업체:
Druck
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Druck

Product Type

Pressure Sensor

Maximum Pressure Measurement

1bar

Minimum Pressure Measurement

0bar

Accuracy

±0.04 %

Analogue Output

Yes

Maximum Supply Voltage

32V

Series

PTXPRESSX

Standards/Approvals

CE, DIN 43650, UKCA

Output Type

Analogue

IP Rating

IP67, IP65

Media Measured

Fluids

Maximum Operating Temperature

80°C

COO (Country of Origin):
GB

Druck PTXPRESSX Series Pressure Sensor, 1 bar Maximum Pressure, 0 bar Minimum Pressure - PTXPRESSX 4


This pressure sensor measures low-range fluid pressures and provides an analogue signal for process monitoring and control. It is intended for industrial environments where a compact, waterproof transducer is required and where operation across a moderate temperature range is necessary. The device is presented in a form suitable for integration with control systems that accept analogue inputs and require common regional approvals.

Features and Benefits:


• Analogueue output enables direct connection to control systems
• ±0.04% accuracy improves measurement repeatability
• 0 to 1 bar span supports low-pressure fluid monitoring
• Withstands up to 80°C for elevated-temperature applications
• IP67 and IP65 ingress protection allows harsh-environment use

Applications


• Suitable for fluid measurement in closed-loop control
• Ideal for hydraulic calibration and low-pressure testing
• Used with pumps for discharge pressure monitoring
• Can be used for process skids requiring waterproof sensors
• Applicable in general industrial instrumentation panels

What supply voltage constraints should be observed?


The unit accepts a maximum supply of 32 V which must not be exceeded to prevent damage.

Which media can be measured with this device?


It is designed specifically for fluid measurement applications where analogue signalling is required.

What approvals support installation in regulated sites?


It carries CE and UKCA markings and uses a DIN 43650 electrical Interface for standardised mating.

How does the enclosure handle exposure to liquids?


The enclosure meets IP67 and IP65 ratings, permitting temporary immersion and high-level dust protection.

관련된 링크들