최근 검색 기록

    Reliance 10bar Temperature and Pressure Relief Valve With Male BSP 1/2 in BSP Male Connection

    RS 제품 번호:
    794-8457
    제조사 부품 번호:
    PTEM550755
    제조업체:
    Reliance Water Controls
    Reliance Water Controls
    모든 Pressure Relief Valves 열람하기
    단종
    RS 제품 번호:
    794-8457
    제조사 부품 번호:
    PTEM550755
    제조업체:
    Reliance Water Controls

    해당 안됨

    COO (Country of Origin):
    US

    제정법과 컴플라이언스

    해당 안됨

    COO (Country of Origin):
    US

    제품 세부 사항

    Full Cartridge Pressure and Temperature Relief Valve


    All Reliance pressure vessels are supplied with a replaceable membrane, which separates the water and air, to prevent contamination of the water system, corrosion of the pressure vessel or pressure loss in the water system.

    Typically pressure vessels are used in pumped systems. When the pump starts, the pressure inside the vessel begins to increase. Once the vessel is full and the pump has reached its high pressure setting it will switch off. When water is then drawn off from the system the air pressure surrounding the membrane will force the water out of the pressure vessel and into the system. Once the membrane is fully deflated and the system has reached its minimum pressure, the pump will start on its low pressure setting and will begin the cycle again.

    The purpose of this system is to prevent constant cycling of the pump and continuous running when the system is being used


    Protect against temperature rising above 95゚C
    Prevent over pressurisation
    Twist toop cartridge design for easy servicing
    Range of different pressure settings and different probe lenghts


    Note

    (7948432 no PTFE), (7948439, 7948448 and 7948457 with probe)

    Approvals

    WRAS


    사양

    속성
    Connection1/2 in BSP Male
    Maximum Set Pressure10bar
    Maximum Temperature+95°C
    For Use WithHot Water
    Connection GenderMale
    Thread Size1/4in
    Thread Standard or Connection TypeBSP
    단종