Reliance Water Controls Stainless Steel Stopcock, 1/2in
- RS 제품 번호:
- 794-8426
- 제조사 부품 번호:
- XVES050900
- 제조업체:
- Reliance Water Controls
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩130,321.60
일시적 품절
- 2026년 1월 08일 부터 2 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 9 | ₩130,321.60 |
| 10 + | ₩123,929.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 794-8426
- 제조사 부품 번호:
- XVES050900
- 제조업체:
- Reliance Water Controls
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Reliance Water Controls | |
| Connection 1 | 1/2 in BSP Male | |
| Body Material | Stainless Steel | |
| For Use With | Cold Water, Hot Water | |
| Operating Pressure | 5bar | |
| Connection Gender 1 | Male | |
| Pipe Size 1 | 1/2in | |
| Operating Temperature Range | -10 → +99 °C | |
| 모두 선택 | ||
|---|---|---|
브랜드 Reliance Water Controls | ||
Connection 1 1/2 in BSP Male | ||
Body Material Stainless Steel | ||
For Use With Cold Water, Hot Water | ||
Operating Pressure 5bar | ||
Connection Gender 1 Male | ||
Pipe Size 1 1/2in | ||
Operating Temperature Range -10 → +99 °C | ||
제외
- COO (Country of Origin):
- IT
Potable Water Shock Arrestor
Potable water shock arrestors are designed to prevent water hammer. Water hammer is caused by shock waves running through the water system which create noise or in severe cases pipe movement within a system, reverberations are a series of shock waves in quick succession. The pressure wave in such circumstances can be up to three times greater than the standing pressure. Water hammer occurs when the flow rate is suddenly changed.
The solution is to fit a shock arrestor directly before the affected fitting. The shock arrestor is a mini expansion vessel, which works by absorbing the shock wave from the fitting so it does not travel through the system and cause a noise, the closer the shock arrestor is installed to the fitting the better
The solution is to fit a shock arrestor directly before the affected fitting. The shock arrestor is a mini expansion vessel, which works by absorbing the shock wave from the fitting so it does not travel through the system and cause a noise, the closer the shock arrestor is installed to the fitting the better
Maximum temperature: 99ﾟC
Minimum temperature: -10ﾟC
Pre-set Pressure: 5 bar
Maximum working pressure: 15 bar
Stainless Steel Flange
Dimensions: 105 (H) x 65 diameter
Minimum temperature: -10ﾟC
Pre-set Pressure: 5 bar
Maximum working pressure: 15 bar
Stainless Steel Flange
Dimensions: 105 (H) x 65 diameter
Approvals
WRAS Approved
Expansion Vessels