Reliance Water Controls 10 bar Temperature & Pressure Relief Valve With 15 to 22 mm²
- RS 제품 번호:
- 794-8448
- 제조사 부품 번호:
- PTEM550951
- 제조업체:
- Reliance Water Controls
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩202,936.50
제조사가 재고 비축중
- 2026년 5월 21일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 9 | ₩202,936.50 |
| 10 + | ₩188,721.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 794-8448
- 제조사 부품 번호:
- PTEM550951
- 제조업체:
- Reliance Water Controls
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Reliance Water Controls | |
| Product Type | Temperature & Pressure Relief Valve | |
| Maximum Set Pressure | 10bar | |
| Inlet Connection Type | MBSP | |
| Maximum Operating Temperature | 100°C | |
| Outlet Connection Type | Threaded | |
| Outlet Port Size | 15 to 22 mm² | |
| Inlet Thread Standard | MBSP | |
| Minimum Set Pressure | 4bar | |
| Application | Pressure Temperature | |
| Inlet Port Gender | Male | |
| Outlet Thread Standard | BSP | |
| Outlet Port Gender | Female | |
| Standards/Approvals | WRAS No. 0910311, BS EN 1490 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Reliance Water Controls | ||
Product Type Temperature & Pressure Relief Valve | ||
Maximum Set Pressure 10bar | ||
Inlet Connection Type MBSP | ||
Maximum Operating Temperature 100°C | ||
Outlet Connection Type Threaded | ||
Outlet Port Size 15 to 22 mm² | ||
Inlet Thread Standard MBSP | ||
Minimum Set Pressure 4bar | ||
Application Pressure Temperature | ||
Inlet Port Gender Male | ||
Outlet Thread Standard BSP | ||
Outlet Port Gender Female | ||
Standards/Approvals WRAS No. 0910311, BS EN 1490 | ||
제외
Full Cartridge Pressure and Temperature Relief Valve
All Reliance pressure vessels are supplied with a replaceable membrane, which separates the water and air, to prevent contamination of the water system, corrosion of the pressure vessel or pressure loss in the water system.
Typically pressure vessels are used in pumped systems. When the pump starts, the pressure inside the vessel begins to increase. Once the vessel is full and the pump has reached its high pressure setting it will switch off. When water is then drawn off from the system the air pressure surrounding the membrane will force the water out of the pressure vessel and into the system. Once the membrane is fully deflated and the system has reached its minimum pressure, the pump will start on its low pressure setting and will begin the cycle again.
The purpose of this system is to prevent constant cycling of the pump and continuous running when the system is being used
Protect against temperature rising above 95ﾟC
Prevent over pressurisation
Twist toop cartridge design for easy servicing
Range of different pressure settings and different probe lenghts
Note
(7948432 no PTFE), (7948439, 7948448 and 7948457 with probe)
Approvals
WRAS
관련된 링크들
- Reliance Water Controls 10 bar Temperature & Pressure Relief Valve With 15 to 22 mm²
- Reliance Water Controls 4.5 bar Temperature & Pressure Relief Valve With 1/2 in 1/2 in
- Reliance Water Controls 3 bar Pressure Relief Valve With 3/4 in 3/4 in
- Reliance Water Controls 3 bar Pressure Relief Valve With 1/2 in 1/2 in
- Reliance 10bar Temperature and Pressure Relief Valve With Male BSP 1/2 in BSP Male Connection
- Reliance Water Controls 16 bar Anti-Vacuum Valve With
- Reliance Water Controls Bronze Thermostatic Washroom Valve
- Reliance Water Controls 10 bar Differential Bypass Valve With 22 mm 22 mm