Fluke 719 -850 mbar to 2.4 bar Pressure Calibrator

모든 Pressure Calibrators 열람하기

Subtotal (1 unit)*

₩10,535,889.00

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 7월 06일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩10,535,889.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
662-2369
제조사 부품 번호:
Fluke-719 30G
제조업체:
Fluke
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Fluke

Product Type

Pressure Calibrator

Maximum Pressure Measurement

2.4bar

Battery Type

Alkaline

Minimum Pressure Measurement

-850mbar

Accuracy

±0.025 %

Resolution

0.1 mbar

Model Number

719

Data Logging

No

Current Loop Measurement

Yes

Display Type

LCD

Power Source

Battery

Minimum Operating Temperature

-10°C

Weight

912g

Maximum Operating Temperature

55°C

Battery Life

12h

Length

210mm

Width

87mm

Height

60mm

Standards/Approvals

No

Hazardous Area Certification

NO

해당 안됨

Fluke Pressure Calibrator, 2.4 Bar Maximum Pressure Measurement, ±0.025 % Accuracy - Fluke-719 30G


This pressure calibrator is a handheld, battery-powered instrument designed for on-site pressure and loop testing in industrial environments. It integrates an electric pump to generate and control pressure while also simulating and sourcing mA signals for current loop diagnostics. The device suits field technicians working on transmitters, valves and I/Ps where rapid, single-handed operation and accurate pressure generation are required.

Features & Benefits


• ±0.025% accuracy for high-precision pressure measurements
• 0.1mbar resolution to detect fine pressure changes
• Built-in electric pump reduces manual hand-pumping effort
• 24V loop supply to power transmitters during tests
• 12h battery life for extended field shifts
• Programmemable pump limits prevent over-pressurisation

**Applications**


• Suitable for calibration of high-accuracy pressure transmitters
• Ideal for troubleshooting 4–20 mA control loops in process plants
• Used for functional testing of pneumatic I/P converters
• Can be used for pressure switch trip point verification
• Suitable for field checks on site-mounted valves and regulators

What pressure range can it handle for typical field tasks?


It supports negative and positive pressures from −850 mbar up to 2.4 bar on the 30 psi variant, allowing verification of sensors and systems that operate below atmospheric pressure and into low‑bar ranges.

How does the instrument assist with current loop diagnostics?


It measures and sources mA with high accuracy and provides a 24V loop supply, enabling simulation of 4–20 mA signals and powering of transmitters while measuring loop response.

What maintenance-related design features improve reliability?


The pump includes a clean‑out port that helps expel moisture and fluids, reducing the likelihood of pump failure and simplifying servicing.

How fast can the pump achieve common test pressures?


The pump reaches −30 psi in under 15 s and −100 psi in under 45 s with 1m of 1/8 in test hose, enabling Rapid setup and cycle testing.

What display and Interface aid field readability?


The unit uses an LCD to present measurement readouts and settings clearly for on-site adjustments and verification.

Note

Warranty is 3 years (pressure calibrator), 1 year (pump)

Approvals

CSA

Standards

EN50082-1:1992 and EN55022:1994 Class B

Supplied with

NIST traceable certification, TL75 test leads, AC72 alligator clip set, push-fit connectors (1/8" NPT male connectors), translucent test hose, product Overview manual (printed), user’s manual (CD-ROM in 14 languages), two 9V alkaline batteries, yellow holster

관련된 링크들