Fluke 718 -850mbar to 20bar Pressure Calibrator
- RS 제품 번호:
- 623-9917
- 제조사 부품 번호:
- FLUKE-718 300G
- 제조업체:
- Fluke
- RS 제품 번호:
- 623-9917
- 제조사 부품 번호:
- FLUKE-718 300G
- 제조업체:
- Fluke
제정법과 컴플라이언스
해당 안됨
- COO (Country of Origin):
- CN
제품 세부 사항
Fluke 718 Pressure Calibrators
The complete solution to pressure calibration.
The Fluke 718 Pressure Calibrator provides a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.
The Fluke 718 Pressure Calibrator provides a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.
Features and Benefits
• Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device
• Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field
• Error % calculation for quicker pass/fail decision making in the field
• Best in class mA accuracy of 0.015% for better measurement confidence and workload coverage
• Min/Max/Hold to capture changing measurements
• Switch test feature for quicker and more accurate pressure switch testing
30G:- Range: -12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa)
• Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field
• Error % calculation for quicker pass/fail decision making in the field
• Best in class mA accuracy of 0.015% for better measurement confidence and workload coverage
• Min/Max/Hold to capture changing measurements
• Switch test feature for quicker and more accurate pressure switch testing
30G:- Range: -12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa)
• For measuring overpressure and vacuum with an internal sensor
• Suitable for non-corrosive gases
• Pressure / vacuum hand pump with fine adjustment and relief valve (helps to protect the pump)
• Select from numerous technical units for the pressure
• Simultaneous measurement of pressure and current for simple P/I or I/P testing
• 24 V loop supply
• Zero and damp functions
• Test functions for push button switch: set, reset, dead zone
• Suitable for non-corrosive gases
• Pressure / vacuum hand pump with fine adjustment and relief valve (helps to protect the pump)
• Select from numerous technical units for the pressure
• Simultaneous measurement of pressure and current for simple P/I or I/P testing
• 24 V loop supply
• Zero and damp functions
• Test functions for push button switch: set, reset, dead zone
• New 1 and 300 PSI pressure ranges mean fewer extra tools required
• 1, 30, 100 & 300 PSI ranges now available
• 1, 30, 100 & 300 PSI ranges now available
Standards
CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V
Supplied with
Fluke 718, holster, TL75 test leads, AC72 crocodile clips, two 9 V batteries, instruction manual
FLUKE Pressure Calibrator, 30V Voltage Rating, 24V Loop Power Supply - 718 Series - FLUKE-718 300G
Want to pump up the pressure in your system but need an easy way to do it safely? Use this pressure calibrator from FLUKE. It measures pressures in non-corrosive gas and liquid systems between -850 mbar and 20 bar to ensure everything runs smoothly. Thanks to the small 1 mbar resolution, you get highly accurate results every time. For peace of mind, the built-in vacuum hand pump and bleed valve protect your device from damage during testing. Quickly flip through ten different pressure unit measurements to fit your equipment's requirements like a glove.
Features & Benefits
• Performs in extreme -10°C to +55°C temperatures to suit use in demanding conditions
• Battery life of four to 20 hours for cable-free operation
• Slim dimensions of 94 (W) x 216 (L) x 66mm (H), so it's comfortable to hold during field testing
• Battery life of four to 20 hours for cable-free operation
• Slim dimensions of 94 (W) x 216 (L) x 66mm (H), so it's comfortable to hold during field testing
Applications
• Automotive industry
• HVAC systems
• Manufacturing sector
• HVAC systems
• Manufacturing sector
Does this device come with accessories?
Yes, this product comes with TL75 test leads, AC72 alligator clips and two 9V batteries, so you have everything you need to get up and running quickly.