Fluke 718 -850 mbar to 7 bar Pressure Calibrator

RS 제품 번호:: 351-2815
제조사 부품 번호:: FLUKE-718 100
제조업체:: Fluke

Fluke 718 -850 mbar to 7 bar Pressure Calibrator

Subtotal (1 unit)*

₩5,780,229.00

제조사가 재고 비축중

2026년 7월 13일 부터 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩5,780,229.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 351-2815
제조사 부품 번호:: FLUKE-718 100
제조업체:: Fluke

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Fluke
	Battery Type	Alkaline
	Maximum Pressure Measurement	7bar
	Product Type	Pressure Calibrator
	Minimum Pressure Measurement	-850mbar
	Accuracy	±0.015 %
	Resolution	0.1 mbar
	Data Logging	No
	Model Number	718
	Current Loop Measurement	Yes
	Display Type	LCD
	Power Source	Battery
	Weight	992g
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	55°C
	Battery Life	20h
	Length	216mm
	Standards/Approvals	No
	Width	94mm
	Height	66mm
	Hazardous Area Certification	NO

	모두 선택
	브랜드 Fluke
	Battery Type Alkaline
	Maximum Pressure Measurement 7bar
	Product Type Pressure Calibrator
	Minimum Pressure Measurement -850mbar
	Accuracy ±0.015 %
	Resolution 0.1 mbar
	Data Logging No
	Model Number 718
	Current Loop Measurement Yes
	Display Type LCD
	Power Source Battery
	Weight 992g
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 55°C
	Battery Life 20h
	Length 216mm
	Standards/Approvals No
	Width 94mm
	Height 66mm
	Hazardous Area Certification NO

Fluke Pressure Calibrator, ±0.015% Accuracy, 7 Bar Maximum Pressure Measurement - FLUKE-718 100

This pressure calibrator is a handheld instrument designed to provide a compact, battery-powered solution for calibrating transmitters, gauges and switches in field and workshop settings. It combines a pressure source with milliamp measurement capability and an integrated pump that resists fluid ingress, allowing technicians to generate and measure pressure while powering loop devices.

Features & Benefits

• ±0.015% mA accuracy for precise current loop verification
• Pressure range from -850 mbar to 7 bar for wide coverage
• High-resolution 0.1 mbar resolution for fine pressure discrimination
• LCD display showing simultaneous pressure and current readings
• Battery operation delivering up to 20 h typical use per set of batteries
• Integrated pump with serviceable valve assembly for field cleaning

Applications

• Suitable for commissioning and calibrating pressure transmitters on site
• Ideal for testing and adjusting pressure switches in process systems
• Used for functional verification of gauges across -850 mbar to 7 bar
• Can be used for loop-powered sensor checks and mA calibration
• Used with non-corrosive gases for field pressure validation

What battery type does it use and how many are required?

It uses alkaline 9V cells and requires two batteries to power all functions.

How does the pump cope with accidental fluid exposure?

The pump features protective check valves and a removable valve assembly enabling in-field cleaning using isopropyl alcohol and simple tools.

What measurement capability exists for current loops?

It measures 0 mA–24 mA with 0.001 mA resolution and an accuracy of 0.015%+1 count and can drive 20 mA into 1000 Ω when battery voltage exceeds 6.8 V.

Which pressure units and ranges are supported via the built-in pump?

The instrument supports multiple units including psi, bar, mbar, kPa, inH2O and mmHg and covers negative pressures to -850 mbar up to its full-scale positive range.

What environmental limits should users observe during operation?

Operate between -10 °C and 55 °C with specified relative-humidity limits and up to 3000m altitude

storage extends beyond these values.

Supplied with

protective yellow holster, test lead set, crocodile clips, 9V alkaline battery (fitted)