Festo 40 mm Bellow Nitrile Rubber (NBR) Suction Cup ESS-40-BN M6

모든 Pneumatic Suction Cups 열람하기

Subtotal (1 unit)*

₩45,420.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 9월 17일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩45,420.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
203-8355
제조사 부품 번호:
ESS-40-BN
제조업체:
Festo
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Festo

Pad Diameter

40mm

Connection Size

M6

Product Type

Suction Cup

Pad Type

Bellow

Pad Material

Nitrile Rubber (NBR)

Connection Type

M6

Series

ESS

Holding Force

52.3N

Vacuum Entry Direction

Position of Connection On Top

Standards/Approvals

RoHS

COO (Country of Origin):
JP

Festo ESS Series Suction Cup, 40mm Pad Diameter, 52.3N Holding Force - ESS-40-BN, Numeric Part Number: 189386


This suction cup is a vacuum handling pad designed for pick-and-place and material handling in automated systems. It uses a flexible bellows pad to conform to irregular surfaces and connects via an M6 threaded Interface positioned on the TOP for vacuum entry. The pad is MADE from nitrile rubber suitable for general industrial environments and is intended for integration where precise, repeatable grip is required.

Features and Benefits:


• M6 threaded connection enables simple integration with actuators
• Bellows-style pad accommodates uneven surfaces for secure grip
• Nitrile rubber composition resists common oils and greases
• 52.3N holding force supports reliable component transfer
• RoHS compliance aligns with restricted-substance requirements

Applications


• Suitable for automated pick-and-place of electronic components
• Ideal for end-of-arm tooling on robotic manipulators
• Used for handling small electrical assemblies during production
• Can be used for mechanical parts transfer in assembly lines

How is the vacuum supplied to the pad?


The vacuum is introduced through the top-mounted M6 connection, allowing direct pipe or fitting attachment for pneumatic supply.

What surface deformability can be expected from the pad material?


The bellows geometry combined with nitrile rubber delivers elastic conformity to mildly irregular surfaces while maintaining vacuum seal integrity.

How should the pad be mounted to a tool changer or arm?


Use an M6 threaded Interface adaptor or fitting to secure the pad to standard threaded ports on end-of-arm tooling.

What handling force can operators plan for when specifying gripper cycles?


Design calculations should use the 52.3N holding capability as the steady-state grip Value for component retention under vacuum.

관련된 링크들