SMC Pneumatic Guided Cylinder - 63mm Bore, MGP Series, 25 mm Double Acting Acting

RS 제품 번호:: 758-0847
제조사 부품 번호:: MGPM63TF-25Z
제조업체:: SMC

SMC Pneumatic Guided Cylinder - 63mm Bore, MGP Series, 25 mm Double Acting Acting

모든 Pneumatic Guided Cylinders 열람하기

Subtotal (1 unit)*

₩847,794.00

재고있음

추가로 2026년 11월 16일 부터 1 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩847,794.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 758-0847
제조사 부품 번호:: MGPM63TF-25Z
제조업체:: SMC

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SMC
	Product Type	Pneumatic Guided Cylinder
	Bore Diameter	63mm
	Series	MGP
	Action Type	Double Acting
	Mount Type	Top Mount, Side, Bottom
	Maximum Operating Pressure	1 Mpa
	Cushioning Type	Rubber
	Piston Rod Thread Standard	G
	Guide Type	Slide Bearing
	Maximum Piston Speed	500mm/s
	Rod Type	Single
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	No
	Height	112mm
	Width	48mm
	Weight	4.2kg
	Stroke Length	25mm
	Length	131.5mm

	모두 선택
	브랜드 SMC
	Product Type Pneumatic Guided Cylinder
	Bore Diameter 63mm
	Series MGP
	Action Type Double Acting
	Mount Type Top Mount, Side, Bottom
	Maximum Operating Pressure 1 Mpa
	Cushioning Type Rubber
	Piston Rod Thread Standard G
	Guide Type Slide Bearing
	Maximum Piston Speed 500mm/s
	Rod Type Single
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Standards/Approvals No
	Height 112mm
	Width 48mm
	Weight 4.2kg
	Stroke Length 25mm
	Length 131.5mm

COO (Country of Origin):: CN

SMC MGP Series Compact Guide Cylinder, 63mm Bore size, 25mm Stroke Length - MGPM63TF-25Z

This Compact guide cylinder is a slide-bearing, guided pneumatic actuator designed for controlled linear motion in automated systems. It operates as a double-acting unit and is suitable for installations that require guided thrust with cushioning at both ends. The cylinder supports multiple mounting orientations for flexible integration within assembly and handling machinery.

Features and Benefits:

• 63mm bore for higher thrust in a Compact format
• 500 mm/s maximum piston speed for Rapid cycling
• Rubber bumpers at both ends reduce impact forces
• Operates up to 1 MPa supplying consistent actuation pressure
• Temperature range -10°C to 60°C enables varied environment use
• 25mm stroke delivers short, accurate linear travel

Applications

• Suitable for precision part transfer in pick-and-place systems
• Ideal for clamping operations in test rigs and fixtures
• Used for short-stroke positioning in Electronic Assembly lines
• Can be used for guiding tooling in mechanical presses
• Suitable for automated inspection stations requiring repeatable motion

What mounting options are available for flexible installation?

The cylinder offers top, side and bottom mounting to accommodate different machine layouts and save space when aligning the guided rod with other components.

How does the guide type affect side-load capability?

The slide-bearing guide provides stable lateral support to resist side loads, improving alignment and reducing wear when guiding off-centre payloads.

What is the unit mass and how does that affect handling?

The component weighs 3.48 kg, which informs handling considerations during installation and influences dynamic response when paired with moving equipment.

What rod and thread standards apply for attachment?

The actuator uses a single rod with a G-standard piston rod thread to permit compatibility with common rod-end fittings and Fasteners.

How does the cushioning influence end-of-stroke behaviour?

Rubber bumpers at both ends absorb residual kinetic energy, lessening shock transmission to the machine frame and prolonging service life of mounted fixtures.

Note

May be used with reed switch 161-782, available in most markets.