SMC Pneumatic Guided Cylinder - 50mm Bore, MGP Series, 150 mm Double Acting Acting

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (1 unit)*

₩1,089,560.00

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 12월 18일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩1,089,560.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
758-0840
제조사 부품 번호:
MGPM50TF-150Z
제조업체:
SMC
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SMC

Product Type

Pneumatic Guided Cylinder

Bore Diameter

50mm

Series

MGP

Action Type

Double Acting

Mount Type

Bottom, Side, Top Mount

Maximum Operating Pressure

1 Mpa

Cushioning Type

Rubber

Rod Type

Single

Guide Type

Slide Bearing

Piston Rod Thread Standard

G

Minimum Operating Temperature

-10°C

Maximum Piston Speed

500mm/s

Maximum Operating Temperature

60°C

Height

112mm

Width

48mm

Standards/Approvals

No

Weight

6.7kg

Stroke Length

150mm

Length

268mm

SMC MGP Series Compact Guide Cylinder, 50mm Bore size, 150mm Stroke Length - MGPM50TF-150Z


This Compact guide cylinder provides guided linear motion for industrial automation tasks, combining a guided slide mechanism with pneumatic actuation to control lateral loads while moving a payload. It is designed for integration where space is limited and precise guided travel is required, operating within standard industrial temperature ranges and compatible with multiple mounting orientations.

Features and Benefits:


• 1MPa maximum operating pressure enables robust pneumatic control
• 150mm stroke offers substantial travel for confined installations
• 50mm bore delivers high positional repeatability and force capacity
• Rubber bumpers on both ends reduce impact and prolong service life
• Slide bearing guide gives stable lateral load support during motion
• Maximum piston speed 500mm/s permits Rapid cycle capability

Applications


• Suitable for pick-and-place modules in automation lines
• Ideal for positioning assemblies in electronics manufacture
• Used with test rigs requiring guided linear motion under load
• Can be used for component transfer in mechanical assembly cells
• Suitable for panel handling and small press alignment tasks

What mounting options are available for flexible installation?


It supports bottom, side and TOP mounting, enabling installation in varied orientations to suit machine layouts.

How does ambient temperature affect operation?


It operates between -10°C and 60°C, so performance remains within that thermal range without additional cooling or heating.

What is the unit mass for handling and support calculations?


The unit weighs 6.055 kg, useful for fixture design and dynamic load assessments.

What rod and connection details should be considered for actuator interfaces?


The piston uses a single rod with a standard G‑threaded rod end for direct mechanical coupling to tooling.

Note

May be used with reed switch 161-782, available in most markets.

관련된 링크들