SMC Pneumatic Guided Cylinder - 40mm Bore, MGP Series, 75 mm Double Acting Acting

This Compact guide cylinder provides guided linear motion with integrated slide bearings for controlled parallel guidance in automation environments. Designed for double-acting operation, it delivers guided push–pull movement with a single rod and rubber bumpers at each end to moderate end-of-stroke impacts. It is suited to applications where guided precision, Compactness and repeatable actuation are required in industrial settings.

• 1MPa maximum pressure supports high-load pneumatic cycles
• 500mm/s maximum piston speed enables Rapid actuation
• 75mm stroke permits short-travel positioning tasks
• Rubber bumper cushions reduce shock at both ends
• Single rod configuration simplifies linkage to tooling
• Side, TOP and bottom mount options allow flexible installation

• Suitable for pick-and-place modules requiring guided motion
• Ideal for press-fit operations needing controlled impact absorption
• Used with assembly jigs for precise short-stroke positioning
• Can be used for conveyor gating and product diverting duties
• Used for test rigs where Compact guided travel is essential

It functions between -10°C and 60°C, allowing deployment in typical factory ambient and moderately warm process zones.

Multiple mount orientations are provided—side, TOP and bottom—to permit direct attachment in constrained or rotated assemblies.

The slide bearing guide delivers consistent lateral support, maintaining parallelism under side loads during actuation.

The mechanism is Compact and weighs 2.52kg with a narrow width and moderate height, easing integration into space-limited equipment.

The double-acting arrangement and maximum piston speed enable efficient reciprocation for repetitive tasks.

May be used with reed switch 161-782, available in most markets.