제조사부품번호

SMC Pneumatic Guided Cylinder - 12mm Bore, MGP Series, 40 mm Double Acting Acting

RS 제품 번호:: 757-8645
제조사 부품 번호:: MGPM12-40Z
제조업체:: SMC

SMC Pneumatic Guided Cylinder - 12mm Bore, MGP Series, 40 mm Double Acting Acting

모든 Pneumatic Guided Cylinders 열람하기

Subtotal (1 unit)*

₩354,760.00

재고있음

추가로 2026년 11월 16일 부터 3 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩354,760.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 757-8645
제조사 부품 번호:: MGPM12-40Z
제조업체:: SMC

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SMC
	Product Type	Pneumatic Guided Cylinder
	Bore Diameter	12mm
	Series	MGP
	Action Type	Double Acting
	Maximum Operating Pressure	1 Mpa
	Cushioning Type	Rubber
	Body Material	Aluminium Alloy
	Piston Rod Thread Standard	Rc
	Rod Type	Single
	Minimum Operating Temperature	-10°C
	Piston Rod Thread Size	M5 x 0.8
	Guide Type	Slide Bearing
	Maximum Piston Speed	500mm/s
	Maximum Operating Temperature	60°C
	Standards/Approvals	No
	Weight	350g
	Width	26mm
	Height	58mm
	Length	82mm
	Stroke Length	40mm

	모두 선택
	브랜드 SMC
	Product Type Pneumatic Guided Cylinder
	Bore Diameter 12mm
	Series MGP
	Action Type Double Acting
	Maximum Operating Pressure 1 Mpa
	Cushioning Type Rubber
	Body Material Aluminium Alloy
	Piston Rod Thread Standard Rc
	Rod Type Single
	Minimum Operating Temperature -10°C
	Piston Rod Thread Size M5 x 0.8
	Guide Type Slide Bearing
	Maximum Piston Speed 500mm/s
	Maximum Operating Temperature 60°C
	Standards/Approvals No
	Weight 350g
	Width 26mm
	Height 58mm
	Length 82mm
	Stroke Length 40mm

로그인하여 CAD 모델 다운로드

COO (Country of Origin):: CN

SMC MGP Series Compact Guide Cylinder, 12mm Bore size, 40mm Stroke Length - MGPM12-40Z

This Compact guide cylinder is a guided pneumatic actuator designed for linear positioning in automation environments. It provides controlled double-acting motion with guided sliding to maintain parallelism under lateral loads, making it suitable for integration into electronic assembly, electrical panel fabrication and mechanical systems where precise short-stroke movement is required.

Features and Benefits:

• 12mm bore delivers Compact force for confined assemblies
• 40mm stroke enables short, repeatable travel for positioning
• Double-acting operation offers controlled push and pull motion
• Aluminium alloy body reduces mass for easier mounting
• Slide bearing guidance provides consistent lateral stability
• Rubber bumpers on both ends absorb impact and reduce vibration

Applications

• Suitable for pick-and-place tasks on small production lines
• Ideal for actuation of fixtures in PCB handling stations
• Used for clamp sequencing in electrical enclosure assembly
• Can be used for small transfer mechanisms in machine tools
• Used with sensors for short travel position feedback in automation

What are the environmental temperature limits for operation?

It operates between -10 °C and 60 °C, supporting typical factory ambient and mild temperature variations.

What is the maximum supply pressure allowed for safe use?

The unit is rated to operate up to 1 MPa, which defines its maximum pneumatic input for normal performance.

How fast can the piston travel for high-speed cycles?

The maximum piston speed is 500 mm/s, allowing for Rapid actuation where cycle time is critical.

What threading and rod type are provided for end fittings?

The piston rod is a single rod with an M5x0.8 thread using an Rc thread standard for connection.

Note

May be used with reed switch 161-782, available in most markets.