제조사부품번호

SMC AS Series Speed Controller Pneumatic Elbow Threaded-to-Tube Adapter 1/8 in One-touch Fitting 8 mm

RS 제품 번호:: 280-9161
제조사 부품 번호:: AS2201F-G01-08A
제조업체:: SMC

SMC AS Series Speed Controller Pneumatic Elbow Threaded-to-Tube Adapter 1/8 in One-touch Fitting 8 mm

모든 Pneumatic Function Fittings 열람하기

Subtotal (1 unit)*

₩24,043.50

제한된 재고

7 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩24,043.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 280-9161
제조사 부품 번호:: AS2201F-G01-08A
제조업체:: SMC

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SMC
	Outlet Connection Type	One-touch Fitting
	Product Type	Pneumatic Elbow Threaded-to-Tube Adapter
	Sub Type	Speed Controller
	Inlet Connection Size	1/8 in
	Outlet Connection Size	8 mm
	Series	AS
	Maximum Operating Pressure	1 MPa
	Material	Polybutylene Terephthalate
	Minimum Operating Temperature	-5°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	RoHS
	Minimum Operating Pressure	0.1MPa
	Proof Pressure	1.5MPa

	모두 선택
	브랜드 SMC
	Outlet Connection Type One-touch Fitting
	Product Type Pneumatic Elbow Threaded-to-Tube Adapter
	Sub Type Speed Controller
	Inlet Connection Size 1/8 in
	Outlet Connection Size 8 mm
	Series AS
	Maximum Operating Pressure 1 MPa
	Material Polybutylene Terephthalate
	Minimum Operating Temperature -5°C
	Maximum Operating Temperature 60°C
	Standards/Approvals RoHS
	Minimum Operating Pressure 0.1MPa
	Proof Pressure 1.5MPa

SMC Series AS Pneumatic Elbow Threaded-to-Tube adaptor, 1/8 inches Inlet size, 8mm Outlet size - AS2201F-G01-08A

This pneumatic elbow threaded-to-tube adaptor provides a Compact connection between a threaded inlet and a push-in tube outlet for pneumatic control systems. Designed for inline flow regulation in industrial automation, it links a 1/8 inches port to an 8mm tube using a threaded-to-one-touch Interface and is suitable for general pneumatic assemblies where space and quick tubing changes are required.

Features & Benefits

• Maximum operating pressure 1MPa delivers stable pneumatic performance
• Proof pressure 1.5MPa offers a margin against overpressure events
• Operating temperature range −5°C to 60°C supports varied ambient conditions
• Brass and PBT construction resists wear while reducing component weight
• One-touch 8mm outlet enables Rapid tube insertion and removal
• Meets RoHS for reduced restricted-substance content

Applications

• Suitable for valve manifolds in factory automation systems
• Ideal for pilot lines in pneumatic control cabinets
• Used with air-actuated cylinders requiring Compact fittings
• Can be used for instrumentation tubing in test rigs
• Suitable for retrofitting pneumatic distribution on production lines

What inlet and outlet connections does it provide?

The device accepts a 1/8 inches threaded inlet and terminates in a push-in 8mm tube connection for simple tubing attachment.

How does material selection affect performance?

Brass provides mechanical durability at the threaded joint while PBT offers chemical resistance and lighter mass at the push-fit end, balancing robustness and handling.

What pressure margins are available for safety considerations?

Normal service is at 1MPa with a separate proof pressure limit of 1.5MPa to verify integrity under short-term higher loads.

How should the fitting be used with regard to temperature?

Operate only within the specified thermal bounds from −5°C to 60°C to maintain sealing and material properties.

Is this suitable for quick maintenance procedures?

Yes

the one-touch outlet allows Rapid tube disconnects, reducing downtime during routine maintenance.