제조사부품번호

Festo MS series 40 μm G3/8 in 14 bar Air Filter 1700L/min max with Manual drain

RS 제품 번호:: 793-210
제조사 부품 번호:: MS4-LF-AGC-E-R-M
제조업체:: Festo

Festo MS series 40 μm G3/8 in 14 bar Air Filter 1700L/min max with Manual drain

Subtotal (1 unit)*

₩142,288.00

제조사가 재고 비축중

2026년 11월 30일 부터 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩142,288.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 793-210
제조사 부품 번호:: MS4-LF-AGC-E-R-M
제조업체:: Festo

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Festo
	Product Type	Air Filter
	Filtration Size	40μm
	Port Size	G3/8 in
	Connection Thread Standard	G
	Drain Type	Manual
	Series	MS
	Seal Material	Nitrile Rubber (NBR)
	Maximum Flow Rate	1700L/min
	Maximum Operating Pressure	14 bar
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	ISO 8573-1:2010, RoHS
	Model Number	8232834
	Filter Type	Sintered
	Bowl Material	Polycarbonate

	모두 선택
	브랜드 Festo
	Product Type Air Filter
	Filtration Size 40μm
	Port Size G3/8 in
	Connection Thread Standard G
	Drain Type Manual
	Series MS
	Seal Material Nitrile Rubber (NBR)
	Maximum Flow Rate 1700L/min
	Maximum Operating Pressure 14 bar
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Standards/Approvals ISO 8573-1:2010, RoHS
	Model Number 8232834
	Filter Type Sintered
	Bowl Material Polycarbonate

COO (Country of Origin):: HU

Festo Series MS Air Filter, 40μm Filtration Size, 1700L/min Nominal Flow - MS4-LF-AGC-E-R-M, Numeric Part Number: 8232834

This Air filter is designed to condition compressed Air and inert gases in industrial pneumatic systems. It combines a centrifugal separator with a sintered element to remove condensate and particles, while a transparent polycarbonate bowl permits Visual inspection. The unit is intended for vertical mounting and operates across typical ambient and media temperatures encountered in factory environments.

Features and Benefits:

• 14 bar Maximum operating pressure gives broad system compatibility
• 40 μm Filtration size reduces particulate ingress into downstream equipment
• 1700 L/min Nominal flow maintains adequate throughput for small systems
• NBR Seal material ensures chemical resistance at contact points
• Manual drain design allows controlled condensate removal

Applications

• Used with pneumatic actuators in assembly lines
• Suitable for compressed Air supply to instrumentation
• Ideal for workshops requiring Visual condensate monitoring
• Can be used for inert gas conditioning in test rigs

What mounting orientation is required for correct operation?

It must be mounted vertically within ±5° to ensure proper condensate separation and drainage.

Which materials contact the process medium and what are they?

The sub-base and housing are die-cast aluminium, the bowl is polycarbonate, the separating plate is POM and Seals are NBR.

How does the design support condensate separation efficiency?

A centrifugal separator ahead of the sintered filter achieves condensate separation greater than 75% before fine filtration.

What temperature range can it tolerate during storage and use?

The device is rated for media, ambient and storage temperatures from -10°C to 60°C.

What standards relate to the purity and material restrictions applied?

It is suitable for compressed Air to ISO 8573-1:2010 and complies with RoHS and VDMA24364-B1/B2-L material requirements.