제조사부품번호

Pico Technology A3000 Series A3136 Oscilloscope Probe, Voltage Type, 1.3 GHz, 10:1, Pico IPI Connector

RS 제품 번호:: 222-2082
제조사 부품 번호:: A3136
제조업체:: Pico Technology

Pico Technology A3000 Series A3136 Oscilloscope Probe, Voltage Type, 1.3 GHz, 10:1, Pico IPI Connector

Subtotal (1 unit)*

₩2,737,260.00

일시적 품절

2026년 11월 04일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩2,737,260.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 222-2082
제조사 부품 번호:: A3136
제조업체:: Pico Technology

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Pico Technology
	Product Type	Oscilloscope Probe
	Probe Type	Voltage
	Attenuation	10:1
	Bandwidth	1.3GHz
	Maximum Common Mode Input Voltage	30V
	Connector Type	Pico IPI
	Model Number	A3136
	Number of Probes	1
	Series	A3000
	Standards/Approvals	REACH, EMC Tested to EN613261:2013 and FCC Part 15 Subpart B, WEEE, RoHS, EN 61010031:2015
	Rise Time	0.3ns

	모두 선택
	브랜드 Pico Technology
	Product Type Oscilloscope Probe
	Probe Type Voltage
	Attenuation 10:1
	Bandwidth 1.3GHz
	Maximum Common Mode Input Voltage 30V
	Connector Type Pico IPI
	Model Number A3136
	Number of Probes 1
	Series A3000
	Standards/Approvals REACH, EMC Tested to EN613261:2013 and FCC Part 15 Subpart B, WEEE, RoHS, EN 61010031:2015
	Rise Time 0.3ns

Datasheet - A3136

COO (Country of Origin):: GB

The Pico A3136 high-impedance active oscilloscope probe has minimal impact on the signal being probed with maximal signal transfer to the PicoScope 6000E Series. Its ergonomic design allows comfortable handheld use with a button to start and pause capturing in PicoScope 6.

The Intelligent Probe Interface powers the probe from the scope and facilitates automatic probe detection and unit scaling. The probe can set scope attenuation and automatically switch to 50 Ω input impedance.

With an input resistance of 1 MΩ and capacitance of 0.9 pF, this active probe offers high input impedance into the GHz range, up to 1.3 GHz. These characteristics make this probe the most versatile for many of your day-to-day measurements.

Features and benefits

For use with PicoScope 6000E Series

Bandwidth: DC to 1.3 GHz into 50 Ω load. DC to 1 GHz nominal system bandwidth with PicoScope 6000E 1 GHz oscilloscope

Rise time: < 466 ps

DC gain accuracy: ±3% of full scale over 15 to 40°C, after 20-minute warmup

Input characteristics: 1 MΩ || 0.9 pF

Attenuation: 10:1

Input voltage

Full scale: ±5 V (DC + AC peak)

Absolute max. voltage: ±30 V (DC + AC peak) subject to frequency derating

DC offset range: ±10 V

General

Probe detection: Automatic with any oscilloscope with Pico Intelligent Probe Interface (IPI)

Operating temperature range: 0 to 50 °C. (15 to 40 °C for quoted accuracy after 20-minute warmup)

Applications

Supplied with/Kit contains:

TA469 Fixed probe tip x 10

TA501 Sprung probe tip x 10

TA470 Ground blade (2 sizes x 2 of each)

Ground lead x 2

Channel markers (8 colors x 2 of each)

Solder-in cable pin x 10

Gold-plated copper wire 0.3 mm

SMD pincer, black

SMD pincer, red

Joggle adaptor

Carry case

Quick Start Guide

What other Oscilloscopes are available in this Pico range?

Pico A3076 750 MHz 10:1 active probe

Approvals/Certification

Safety compliance EN 61010-031:2015

EMC compliance Tested to EN61326-1:2013 and FCC Part 15 Subpart B

Environmental approvals RoHS, WEEE, REACH