RS PRO Oscilloscope Probe, Differential Type, 50 MHz, 1:10, 1:100, BNC, USB Type B, Socket Connector

The probes are equipped with standard BNC input connectors. They can be used with any manufacturer oscilloscope (oscilloscope input impedance should set to 1 MΩ. When 50 Ω is selected, the attenuation multiply attenuates doubles) to test waveform of the tested circuits. There is an automatic save function, to prevent users reoperating in case of power supply drops. The probes have good capability of common mode noise suppression and can be widely used in the research and development, debugging or overhauling work for switching power supply, frequency converter, electronic ballast, frequency conversion electronic appliances and other electric power equipment.

Rise time ≤7 ns

DC accuracy ±1%

Attenuation ratio 50 X/500 X

Maximum differential test voltage (DC + Peak AC) 10 X: 80 V, 100 X: 800 V

Maximum input common mode voltage (voltage-to-earth Vrms) 800 Vrms

Input impedance single-ended to ground 27 MΩ, two inputs 54 MΩ

Input capacitance single-ended to ground <2.3 pF, two inputs <1.2 pF

CMRR: DC >80 dB; 100 kHz >60 dB; 1 MHz >50 dB

Propagation delay 18 ns ± 1 ns

Power supply 9 V DC power

Probe body dimensions 165 x 69 x 26 mm

Probe body weight approximately 500 g

Frequency converter

Welding, plating power supplies

Induction heating, electomagnetic oven