제조사부품번호

onsemi FOD8480 Optocoupler, Surface, 6-Pin 6-Pin SOP

RS 제품 번호:: 195-8848
제조사 부품 번호:: FOD8480
제조업체:: onsemi

onsemi FOD8480 Optocoupler, Surface, 6-Pin 6-Pin SOP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 pack of 10 units)*

₩25,993.50

마지막 RS 재고

최종적인 3,700 개 unit(s)이 배송 준비 됨

수량	한팩당	한팩당*
10 - 20	₩2,599.35	₩25,993.50
30 - 40	₩2,540.85	₩25,408.50
50 +	₩2,486.25	₩24,862.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 195-8848
제조사 부품 번호:: FOD8480
제조업체:: onsemi

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	onsemi
	Product Type	Optocoupler
	Mount Type	Surface
	Maximum Forward Voltage	0.8V
	Packaging	Tube or Tape and Reel
	Number of Pins	6
	Package Type	6-Pin SOP
	Typical Rise Time	15ns
	Maximum Input Current	20mA
	Isolation Voltage	5000V
	Minimum Operating Temperature	-40°C
	Logic Output	Yes
	Maximum Operating Temperature	100°C
	Typical Fall Time	10ns
	Standards/Approvals	UL1577, 000 VACRMS for 1 Min., DIN-EN/IEC60747-5-5, 140 V Peak Working Insulation Voltage
	Series	FOD848x
	Automotive Standard	No

	모두 선택
	브랜드 onsemi
	Product Type Optocoupler
	Mount Type Surface
	Maximum Forward Voltage 0.8V
	Packaging Tube or Tape and Reel
	Number of Pins 6
	Package Type 6-Pin SOP
	Typical Rise Time 15ns
	Maximum Input Current 20mA
	Isolation Voltage 5000V
	Minimum Operating Temperature -40°C
	Logic Output Yes
	Maximum Operating Temperature 100°C
	Typical Fall Time 10ns
	Standards/Approvals UL1577, 000 VACRMS for 1 Min., DIN-EN/IEC60747-5-5, 140 V Peak Working Insulation Voltage
	Series FOD848x
	Automotive Standard No

Datasheet FOD8480

The FOD8480 and FOD8482 are low power optocouplers, which support isolated interface to Intelligent Power Module (IPM) communicating digital control signals from the controller to the IPM, without conducting ground loops or hazardous voltages.

The FOD848x Series, packaged in a stretched body 6−pin small outline plastic package, consists of an aluminium gallium arsenide (AlGaAs) light emitting diode and an integrated high gain photo detector. The detector has a detector threshold with hysteresis. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter. Its non−inverting output is designed as totem pole, which does not require any pull−up resistor.

The FOD8482 has a lower threshold input current, IFLH, at 3.0 mA maximum.

onsemi FOD8480 Optocoupler, Surface, 6-Pin 6-Pin SOP

대량 구매 가격 책정 옵션

관련된 링크들