onsemi FOD8480T Optocoupler, Surface, 6-Pin 6-Pin SOP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Optocouplers 열람하기
현재 액세스할 수 없는 재고 정보
포장 옵션
RS 제품 번호:
195-8850
제조사 부품 번호:
FOD8480T
제조업체:
onsemi
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

onsemi

Mount Type

Surface

Product Type

Optocoupler

Maximum Forward Voltage

0.8V

Packaging

Tube or Tape and Reel

Number of Pins

6

Package Type

6-Pin SOP

Typical Rise Time

15ns

Maximum Input Current

20mA

Isolation Voltage

5000V

Logic Output

Yes

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

100°C

Standards/Approvals

000 VACRMS for 1 Min., DIN-EN/IEC60747-5-5, UL1577, 140 V Peak Working Insulation Voltage

Typical Fall Time

10ns

Series

FOD848x

Automotive Standard

No

The FOD8480 and FOD8482 are low power optocouplers, which support isolated interface to Intelligent Power Module (IPM) communicating digital control signals from the controller to the IPM, without conducting ground loops or hazardous voltages.

The FOD848x Series, packaged in a stretched body 6−pin small outline plastic package, consists of an aluminium gallium arsenide (AlGaAs) light emitting diode and an integrated high gain photo detector. The detector has a detector threshold with hysteresis. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter. Its non−inverting output is designed as totem pole, which does not require any pull−up resistor.

The FOD8482 has a lower threshold input current, IFLH, at 3.0 mA maximum.

관련된 링크들