onsemi Optocoupler, Surface, 6-Pin 6-Pin SOP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Optocouplers 열람하기
대량 구매 할인 기용 가능
View bulk pricing options

Subtotal (1 tube of 100 units)*

₩214,110.00

Add to Basket
수량 선택 또는 입력
마지막 RS 재고
  • 최종적인 3,700 개 unit(s)이 배송 준비 됨

수량
한팩당
Per Tube*
100 - 100₩2,141.10₩214,090.50
200 - 300₩2,086.50₩208,728.00
400 +₩2,045.55₩204,555.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
195-8847
제조사 부품 번호:
FOD8480
제조업체:
onsemi
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

onsemi

Product Type

Optocoupler

Mount Type

Surface

Maximum Forward Voltage

0.8V

Packaging

Tube or Tape and Reel

Number of Pins

6

Package Type

6-Pin SOP

Typical Rise Time

15ns

Maximum Input Current

20mA

Isolation Voltage

5000V

Logic Output

Yes

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

100°C

Typical Fall Time

10ns

Standards/Approvals

UL1577, 000 VACRMS for 1 Min., DIN-EN/IEC60747-5-5, 140 V Peak Working Insulation Voltage

Series

FOD848x

Automotive Standard

No

The FOD8480 and FOD8482 are low power optocouplers, which support isolated interface to Intelligent Power Module (IPM) communicating digital control signals from the controller to the IPM, without conducting ground loops or hazardous voltages.

The FOD848x Series, packaged in a stretched body 6−pin small outline plastic package, consists of an aluminium gallium arsenide (AlGaAs) light emitting diode and an integrated high gain photo detector. The detector has a detector threshold with hysteresis. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter. Its non−inverting output is designed as totem pole, which does not require any pull−up resistor.

The FOD8482 has a lower threshold input current, IFLH, at 3.0 mA maximum.

관련된 링크들