onsemi FOD8482 Optocoupler, Surface, 4-Pin 6-Pin SOP
- RS 제품 번호:
- 195-8852
- 제조사 부품 번호:
- FOD8482
- 제조업체:
- onsemi
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal (1 pack of 10 units)*
₩23,224.50
단종되는 중
- 최종적인 470 개 unit(s)이 배송 준비 됨
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 - 20 | ₩2,322.45 | ₩23,224.50 |
| 30 - 40 | ₩2,271.75 | ₩22,717.50 |
| 50 + | ₩2,223.00 | ₩22,230.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 195-8852
- 제조사 부품 번호:
- FOD8482
- 제조업체:
- onsemi
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | onsemi | |
| Mount Type | Surface | |
| Product Type | Optocoupler | |
| Maximum Forward Voltage | 0.8V | |
| Number of Pins | 4 | |
| Package Type | 6-Pin SOP | |
| Typical Rise Time | 15ns | |
| Maximum Input Current | 20mA | |
| Isolation Voltage | 5000V | |
| Logic Output | Yes | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 100°C | |
| Standards/Approvals | UL1577, DIN-EN/IEC60747-5-5 | |
| Typical Fall Time | 10ns | |
| Series | FOD848x | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 onsemi | ||
Mount Type Surface | ||
Product Type Optocoupler | ||
Maximum Forward Voltage 0.8V | ||
Number of Pins 4 | ||
Package Type 6-Pin SOP | ||
Typical Rise Time 15ns | ||
Maximum Input Current 20mA | ||
Isolation Voltage 5000V | ||
Logic Output Yes | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 100°C | ||
Standards/Approvals UL1577, DIN-EN/IEC60747-5-5 | ||
Typical Fall Time 10ns | ||
Series FOD848x | ||
Automotive Standard No | ||
The FOD8480 and FOD8482 are low power optocouplers, which support isolated Interface to Intelligent Power Module (IPM) communicating digital control signals from the controller to the IPM, without conducting ground loops or hazardous voltages.
The FOD848x Series, packaged in a stretched body 6−pin small outline plastic package, consists of an aluminium gallium arsenide (AlGaAs) light emitting diode and an integrated high gain photo detector. The detector has a detector threshold with hysteresis. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter. Its non−inverting output is designed as totem pole, which does not require any pull−up resistor.
The FOD8482 has a lower threshold input current, IFLH, at 3.0 mA maximum.
관련된 링크들
- onsemi Optocoupler, Surface Mount, 4-Pin 6-Pin SOP
- onsemi FOD8482TR2 DC Input Optocoupler, Surface Mount, 6-Pin SOIC
- onsemi FOD8173 Optocoupler, Surface Mount, 6-Pin SOP
- onsemi FOD8480 Optocoupler, Surface Mount, 6-Pin 6-Pin SOP
- onsemi FOD8163V Optocoupler, Surface Mount, 6-Pin SOP
- onsemi FOD8173T Optocoupler, Surface Mount, 6-Pin SOP
- onsemi FOD8343TV Optocoupler, Surface Mount, 6-Pin SOP
- onsemi FOD8480T Optocoupler, Surface Mount, 6-Pin 6-Pin SOP