Gossen Metrawatt PROFiTEST MF TECH Multifunction Tester 600V Earth Resistance Measurement With USB

모든 Multifunction Testers 열람하기

Subtotal (1 unit)*

₩6,372,740.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 7 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩6,372,740.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
266-2728
Distrelec 제품 번호:
303-73-732
제조사 부품 번호:
M535K
제조업체:
Gossen Metrawatt
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Gossen Metrawatt

Product Type

Multifunction Tester

Loop Impedance Test Type

3 Wire, 2 Wire, Phase to Neutral, Phase to Earth

Automatic RCD Test

No

RCD Ramp Test

No

Model Number

PROFiTEST MF TECH

Non-Tripping

Yes

Insulation Test Voltage

600V

Maximum Voltage Measurement

230V

Earth Resistance Measurement

Yes

Downloadable Data

No

Interface Type

USB

Continuity Test Current

1.6mA

RCD Test Type

Type A

Standards/Approvals

DAkkS Calibration Certificate, EN 501101, IEC 603646, RoHS

Width

260mm

Weight

2.7kg

Length

330mm

Remote Switch Mode

No

Height

90mm

IP Rating

IP40

Test Standards

DIN VDE 0100-600, EN 61010

Battery Type

Rechargeable

Power Source

Battery

Minimum Operating Temperature

0°C

Safety Category Voltage

300V

Display Type

LCD

Maximum Operating Temperature

40°C

Safety Category Level

CAT III, CAT IV

제외

COO (Country of Origin):
DE

Gossen-Metrawatt Multifunction Tester, 230V Maximum Voltage Measurement, 600V Insulation Test Voltage - M535K


This multifunction tester is a portable electrical tester intended for inspection and verification of low-voltage installations. It operates from battery power and provides measurement capabilities for voltage, insulation, loop impedance and earth resistance within typical on-site conditions. The instrument includes an LCD for readout and a USB Interface for data connectivity, with an ingress protection rating suitable for indoor use.

Features and Benefits:


• *Made in Germany - including DAkkS calibration certificate
• 1.6 mA continuity test current provides sensitive loop and conductor checks
• 600 V insulation test voltage enables robust dielectric verification
• 230 V maximum voltage measurement supports standard supply testing
• CAT III/CAT IV safety category allows measurements in protected installations
• Rechargeable battery offers untethered on-site operation

Applications


• Suitable for verifying RCD Type A performance in installations
• Ideal for measuring earth resistance during periodic inspections
• Used with distribution boards for loop impedance assessment
• Can be used for insulation testing on newly installed circuits
• Useful for continuity checks in maintenance and fault-finding

What RCD test capability does it offer?


It performs Type A RCD tests and supports non-tripping test procedures for live-circuit diagnostics.

Which standards and approvals govern its measurements?


The instrument is compliant with DIN VDE 0100-600 and EN 61010 and carries DAkkS calibration and EN 50110-1, IEC 60364-6 and RoHS listings.

What environmental operating range applies to field use?


It is designed to operate between 0 °C and 40 °C and has an IP40 rating indicating protection against solid objects but not water ingress.

How does it handle loop impedance measurement modes?


It can perform 2‑wire and 3‑wire loop impedance tests Plus phase-to-neutral and phase-to-earth measurements.

What Interface and data options are available?


The unit provides a USB Interface for connection but does not support downloadable data storage.

관련된 링크들