Infineon TLE94106ESXUMA1, DC Motor DC Motor Driver 24-Pin, TSDSO
- RS 제품 번호:
- 229-1922
- 제조사 부품 번호:
- TLE94106ESXUMA1
- 제조업체:
- Infineon
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 5 units)*
₩18,115.50
재고있음
- 추가로 2026년 4월 27일 부터 2,835 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 5 - 5 | ₩3,623.10 | ₩18,115.50 |
| 10 - 95 | ₩3,533.40 | ₩17,667.00 |
| 100 - 245 | ₩3,443.70 | ₩17,218.50 |
| 250 - 495 | ₩3,357.90 | ₩16,789.50 |
| 500 + | ₩3,276.00 | ₩16,380.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 229-1922
- 제조사 부품 번호:
- TLE94106ESXUMA1
- 제조업체:
- Infineon
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Infineon | |
| Product Type | DC Motor Driver | |
| Motor Type | DC Motor | |
| Configuration | Half Bridge | |
| Mount Type | Surface | |
| Package Type | TSDSO | |
| Output Current | 2A | |
| Pin Count | 24 | |
| Maximum Supply Voltage | 40V | |
| Minimum Supply Voltage | 3V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 1.15mm | |
| Length | 4mm | |
| Series | TLE94106ESX | |
| Standards/Approvals | RoHS | |
| Supply Current | 1.5μA | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Infineon | ||
Product Type DC Motor Driver | ||
Motor Type DC Motor | ||
Configuration Half Bridge | ||
Mount Type Surface | ||
Package Type TSDSO | ||
Output Current 2A | ||
Pin Count 24 | ||
Maximum Supply Voltage 40V | ||
Minimum Supply Voltage 3V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 1.15mm | ||
Length 4mm | ||
Series TLE94106ESX | ||
Standards/Approvals RoHS | ||
Supply Current 1.5μA | ||
Automotive Standard No | ||
The Infineon half-bridge driver is a protected six-fold designed especially for automotive motion control applications such as heating, ventilation and air conditioning flap DC motor control. It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI interface. The half bridge drivers are designed to drive DC motor loads in sequential or parallel operation. operation modes forward (cw), reverse (ccw), brake and high impedance are controlled from a 16-bit SPI interface. It offers diagnosis features such as short circuit, open load, power supply failure and over temperature detection.
It has very low power consumption in sleep mode
It has cross-current protection
It has over temperature pre-warning and protection
It has fast diagnosis with the global error flag
관련된 링크들
- Infineon, DC Motor DC Motor Driver 24-Pin, TSDSO
- Infineon TLE94104EPXUMA1, Stepper, DC Motor Motor Driver IC 14-Pin, PG-TSDSO-14
- Infineon TLE9461ESXUMA1, CAN Caps 5 Mbps, 24-Pin TSDSO
- Infineon TLE94004EPXUMA1, Brushless Motor Driver IC 14-Pin, TSDSO
- Infineon TLE9140EQWXUMA1, Brushless Motor Driver IC 32-Pin, TSDSO-32
- Infineon, Stepper, DC Motor Motor Driver IC 14-Pin, PG-TSDSO-14
- Infineon TLE94613ESXUMA1 System-On-Chip 24-Pin TSDSO-24
- Infineon TLE9471ESXUMA1 System-On-Chip 24-Pin TSDSO-24
