Infineon, Stepper, DC Motor Motor Driver IC 14-Pin, PG-TSDSO-14

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Motor Driver ICs 열람하기
대량 구매 할인 기용 가능

Subtotal (1 reel of 3000 units)*

₩4,896,450.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 8월 21일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
릴당*
3000 - 3000₩1,632.15₩4,898,790.00
6000 - 6000₩1,600.95₩4,801,095.00
9000 +₩1,567.80₩4,705,155.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
258-4154
제조사 부품 번호:
TLE94104EPXUMA1
제조업체:
Infineon
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Infineon

Product Type

Motor Driver IC

Motor Type

Stepper, DC Motor

Configuration

Half Bridge

Mount Type

Surface

Package Type

PG-TSDSO-14

Output Current

2A

Pin Count

14

Minimum Supply Voltage

-0.3V

Maximum Supply Voltage

20V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

150°C

Height

1.15mm

Standards/Approvals

RoHS

Series

TLE94104EP

Length

4.9mm

Automotive Standard

AEC

Supply Current

3mA

The MOTIX™ TLE9410EP is a protected four-fold half-bridge driver designed especially for automotive motion control applications


It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI interface. The half bridge drivers are designed to drive DC motor loads in sequential or parallel operation. Operation modes forward (cw), reverse (ccw), brake and high impedance are controlled from a 16-bit SPI interface. It offers diagnosis features such as short circuit, open load, power supply failure and overtemperature detection. In combination with its low quiescent current, this device is attractive among others for automotive applications. The small fine pitch exposed pad package, PG-TSDSO-14, provides good thermal performance and reduces PCB-board space and costs.

Summary of Features


•Four half bridge power outputs

•Very low power consumption in sleep mode

•3.3V / 5V compatible inputs with hysteresis

•All outputs with overload and short circuit protection

•Independently diagnosable outputs (overcurrent, open load)

•Open load diagnostics in ON-state for all high-side and low-side

•16-bit Standard SPI interface with daisy chain and in-frame response capability for control and diagnosis

•Fast diagnosis with the global error flag

•Overtemperature pre-warning and protection

•Over- and Undervoltage lockout

•Cross-current protection

Potential Applications


•HVAC Flap DC motors

•Monostable and bistable Relays

•Side mirror x-y adjustment and mirror fold

관련된 링크들