Infineon SIPMOS Type P-Channel MOSFET, 430 mA, 250 V Enhancement, 4-Pin SOT-223 BSP317PH6327XTSA1

RS 제품 번호:: 753-2813
Distrelec 제품 번호:: 304-35-440
제조사 부품 번호:: BSP317PH6327XTSA1
제조업체:: Infineon

Infineon SIPMOS Type P-Channel MOSFET, 430 mA, 250 V Enhancement, 4-Pin SOT-223 BSP317PH6327XTSA1

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 pack of 10 units)*

₩12,180.00

400 개 단위 배송 준비 완료
추가로 2026년 12월 31일 부터 4,000 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	한팩당*
10 - 240	₩1,218.00	₩12,180.00
250 - 490	₩1,186.00	₩11,860.00
500 +	₩1,170.00	₩11,700.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 753-2813
Distrelec 제품 번호:: 304-35-440
제조사 부품 번호:: BSP317PH6327XTSA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Product Type	MOSFET
	Channel Type	Type P
	Maximum Continuous Drain Current Id	430mA
	Maximum Drain Source Voltage Vds	250V
	Series	SIPMOS
	Package Type	SOT-223
	Mount Type	Surface
	Pin Count	4
	Maximum Drain Source Resistance Rds	5Ω
	Channel Mode	Enhancement
	Minimum Operating Temperature	-55°C
	Maximum Power Dissipation Pd	1.8W
	Typical Gate Charge Qg @ Vgs	11.6nC
	Maximum Operating Temperature	150°C
	Standards/Approvals	No
	Length	6.5mm
	Height	1.6mm
	Automotive Standard	AEC-Q101

	모두 선택
	브랜드 Infineon
	Product Type MOSFET
	Channel Type Type P
	Maximum Continuous Drain Current Id 430mA
	Maximum Drain Source Voltage Vds 250V
	Series SIPMOS
	Package Type SOT-223
	Mount Type Surface
	Pin Count 4
	Maximum Drain Source Resistance Rds 5Ω
	Channel Mode Enhancement
	Minimum Operating Temperature -55°C
	Maximum Power Dissipation Pd 1.8W
	Typical Gate Charge Qg @ Vgs 11.6nC
	Maximum Operating Temperature 150°C
	Standards/Approvals No
	Length 6.5mm
	Height 1.6mm
	Automotive Standard AEC-Q101

Infineon SIPMOS Series MOSFET, 250V Maximum Drain Source Voltage, 430mA Maximum Continuous Drain Current - BSP317PH6327XTSA1

This MOSFET is a P‑channel enhancement device designed for high‑voltage switching in surface‑mount assemblies. It operates across a wide thermal span suitable for industrial and automotive environments and is supplied in a SOT‑223 package for straightforward board mounting.

Features and Benefits:

• 250V drain‑source rating enables high‑voltage switching capability
• 5Ω maximum Rds minimises conduction losses in low‑current circuits
• 430mA continuous drain current supports steady‑state loads
• 11.6nC typical gate charge reduces switching energy loss
• 20V gate threshold allows standard gate drive voltages
• AEC‑Q101 qualification meets automotive component stress levels

Applications

• Suitable for automotive power distribution and load switching
• Ideal for high‑voltage reverse battery protection circuits
• Used with accessory power modules in vehicles and machinery
• Can be used for industrial control and signal switching
• Appropriate for compact surface‑mount power conversion boards

What mounting considerations apply for thermal performance?

The SOT‑223 surface‑mount format provides a thermal path through PCB copper

adequate board heatsinking increases the 1.8W power dissipation capability under elevated ambient temperatures.

How does it behave in cold and hot environments?

It is specified to function from -55°C up to 150°C, maintaining device operation across typical automotive and industrial temperature ranges.

What gate drive constraints should designers observe?

Gate‑to‑source voltage must not exceed 20V

design gate drivers accordingly and include protection to prevent exceeding this limit.

Are there switching trade‑offs to consider?

The relatively low gate charge of 11.6nC balances switching speed and drive current, so driver selection should match the desired trade‑off between transition speed and EMI.