Vishay E Type N-Channel MOSFET, 4.4 A, 800 V Enhancement, 3-Pin IPAK SIHU5N80AE-GE3

RS 제품 번호:: 204-7229
제조사 부품 번호:: SIHU5N80AE-GE3
제조업체:: Vishay

Vishay E Type N-Channel MOSFET, 4.4 A, 800 V Enhancement, 3-Pin IPAK SIHU5N80AE-GE3

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 pack of 10 units)*

₩10,413.00

추가로 2026년 6월 15일 부터 20 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	한팩당*
10 - 740	₩1,041.30	₩10,413.00
750 - 1490	₩1,014.00	₩10,140.00
1500 +	₩984.75	₩9,847.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 204-7229
제조사 부품 번호:: SIHU5N80AE-GE3
제조업체:: Vishay

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Vishay
	Channel Type	Type N
	Product Type	MOSFET
	Maximum Continuous Drain Current Id	4.4A
	Maximum Drain Source Voltage Vds	800V
	Package Type	IPAK
	Series	E
	Mount Type	Through Hole
	Pin Count	3
	Maximum Drain Source Resistance Rds	1.35Ω
	Channel Mode	Enhancement
	Maximum Power Dissipation Pd	62.5W
	Maximum Gate Source Voltage Vgs	30V
	Minimum Operating Temperature	-55°C
	Typical Gate Charge Qg @ Vgs	16.5nC
	Forward Voltage Vf	1.2V
	Maximum Operating Temperature	150°C
	Length	6.73mm
	Height	6.22mm
	Standards/Approvals	No
	Width	2.39mm
	Automotive Standard	No

	모두 선택
	브랜드 Vishay
	Channel Type Type N
	Product Type MOSFET
	Maximum Continuous Drain Current Id 4.4A
	Maximum Drain Source Voltage Vds 800V
	Package Type IPAK
	Series E
	Mount Type Through Hole
	Pin Count 3
	Maximum Drain Source Resistance Rds 1.35Ω
	Channel Mode Enhancement
	Maximum Power Dissipation Pd 62.5W
	Maximum Gate Source Voltage Vgs 30V
	Minimum Operating Temperature -55°C
	Typical Gate Charge Qg @ Vgs 16.5nC
	Forward Voltage Vf 1.2V
	Maximum Operating Temperature 150°C
	Length 6.73mm
	Height 6.22mm
	Standards/Approvals No
	Width 2.39mm
	Automotive Standard No

Datasheet - SIHU5N80AE-GE3

Vishay Series E Power MOSFET, 800V Drain Source Voltage, 4.4A Maximum Continuous Drain Current - SIHU5N80AE-GE3

This power MOSFET is a high-voltage N-channel enhancement-mode device designed for switching and power conversion in industrial and electronic systems. It is supplied in a through-hole IPAK package intended for robust board mounting and straightforward installation in control and power assemblies. The device is appropriate where elevated drain-to-source voltage capability and moderate current handling are required.

Features and Benefits:

• 800V Vds rating enabling high-voltage switching applications • 4.4A continuous drain current for moderate load delivery • 1.35Ω Rds(on) minimises conduction losses under load • 62.5W power dissipation supports sustained thermal loading • 16.5nC typical gate charge for predictable switching control • 150°C maximum operating temperature for high-temperature environments

Applications

• Suitable for high-voltage power supplies and converters • Ideal for industrial motor drive front-ends • Used for mains-side switching in lighting controls • Can be used for snubber or clamp circuits in power modules • Suitable for prototyping and repair in through-hole assemblies

What gate voltage range should I apply for safe operation?

The device accepts up to 30V between gate and source

designs typically use gate drive levels compatible with that maximum to avoid gate overstress.

How does the gate charge affect driver selection?

A 16.5nC gate charge at the rated gate drive determines required driver current and switching losses

choose a driver capable of sourcing sufficient Peak current for desired switching speed.

What environmental temperatures can it withstand during operation?

It is specified to operate down to -55°C and up to 150°C, so thermal management and junction-to-ambient considerations remain important at elevated temperatures.

Which mounting style does it require on the PCB?

It is a through-hole component in an IPAK body, so designs must include appropriate drill holes and solder pads for mechanical stability and heat transfer.