Vishay IRF740A Type N-Channel Power MOSFET, 10 A, 400 V Enhancement, 3-Pin TO-220AB

RS 제품 번호:: 178-0831
제조사 부품 번호:: IRF740APBF
제조업체:: Vishay

Vishay IRF740A Type N-Channel Power MOSFET, 10 A, 400 V Enhancement, 3-Pin TO-220AB

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 tube of 50 units)*

₩120,802.50

추가로 2026년 6월 29일 부터 900 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	Per Tube*
50 - 200	₩2,416.05	₩120,802.50
250 +	₩2,174.25	₩108,712.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 178-0831
제조사 부품 번호:: IRF740APBF
제조업체:: Vishay

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Vishay
	Product Type	Power MOSFET
	Channel Type	Type N
	Maximum Continuous Drain Current Id	10A
	Maximum Drain Source Voltage Vds	400V
	Package Type	TO-220AB
	Series	IRF740A
	Mount Type	Through Hole
	Pin Count	3
	Maximum Drain Source Resistance Rds	550mΩ
	Channel Mode	Enhancement
	Forward Voltage Vf	2V
	Minimum Operating Temperature	-55°C
	Maximum Power Dissipation Pd	125W
	Typical Gate Charge Qg @ Vgs	36nC
	Maximum Gate Source Voltage Vgs	30V
	Maximum Operating Temperature	150°C
	Standards/Approvals	RoHS
	Width	4.7mm
	Length	10.41mm
	Height	9.01mm
	Automotive Standard	No

	모두 선택
	브랜드 Vishay
	Product Type Power MOSFET
	Channel Type Type N
	Maximum Continuous Drain Current Id 10A
	Maximum Drain Source Voltage Vds 400V
	Package Type TO-220AB
	Series IRF740A
	Mount Type Through Hole
	Pin Count 3
	Maximum Drain Source Resistance Rds 550mΩ
	Channel Mode Enhancement
	Forward Voltage Vf 2V
	Minimum Operating Temperature -55°C
	Maximum Power Dissipation Pd 125W
	Typical Gate Charge Qg @ Vgs 36nC
	Maximum Gate Source Voltage Vgs 30V
	Maximum Operating Temperature 150°C
	Standards/Approvals RoHS
	Width 4.7mm
	Length 10.41mm
	Height 9.01mm
	Automotive Standard No

Vishay IRF740A Series Power MOSFET, 400V Maximum Drain Source Voltage, 10A Maximum Continuous Drain Current - IRF740APBF

This power MOSFET is a high-voltage N-channel switching transistor designed for demanding industrial and automation environments. It handles high drain-to-source voltages and suits circuits that require robust switching capability and moderate continuous current capacity while being mounted on a through-hole PCB format.

Features and Benefits:

• 400V rated drain-to-source voltage provides high-voltage switching capability • 10A continuous drain current supports sustained power delivery • 550mΩ low Rds(on) reduces conduction losses during operation • 125W power dissipation enables high-power handling in assemblies • 36nC typical gate charge allows predictable switching behaviour • 150°C maximum operating temperature tolerates elevated thermal conditions

Applications

• Suitable for industrial inverter and converter power stages • Ideal for motor drive switching in automation systems • Used with high-voltage power supplies in test equipment • Can be used for switch-mode power supply primary switches • Suitable for high-voltage relay replacement and protection circuits

What mounting method is required for reliable thermal contact?

It is supplied in a TO-220AB through-hole package that enables secure heatsink attachment via the rear mounting tab for effective heat removal.

How tolerant is the gate to control voltage excursions?

The gate accepts up to 30V between gate and source, allowing standard gate drive voltages while protecting against overvoltage.

What ambient temperature range can it operate in?

It functions across a wide temperature span from -55°C up to its maximum 150°C junction limit for elevated-temperature applications.

How does the device behave during hard switching events?

The specified gate charge of 36nC and the device capacitances define switching losses and timing, which helps in calculating drive requirements for hard-switching topologies.