Omron Voltage Monitoring Relay, 1 Phase, SPST, 200 V, 300 V, 600 V, DIN Rail

RS 제품 번호:: 111-3114
제조사 부품 번호:: K8DT-VS3TD
제조업체:: Omron

Omron Voltage Monitoring Relay, 1 Phase, SPST, 200 V, 300 V, 600 V, DIN Rail

Subtotal (1 unit)*

₩265,061.20

일시적 품절

2026년 3월 02일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩265,061.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 111-3114
제조사 부품 번호:: K8DT-VS3TD
제조업체:: Omron

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Omron
	Monitoring Application	Voltage
	Electrical Phase	1
	Voltage Sensing Range	200 V, 300 V, 600 V
	Contact Configuration	SPST
	Voltage Sensitivity	Overvoltage, Undervoltage
	Mounting Type	DIN Rail
	Time Delay	250ms
	Series	K8DT-VS
	Operating Temperature Range	+60°C
	Maximum Voltage Sensed	200 V, 300 V, 600V
	Height	90mm
	Maximum Operating Temperature	+60°C
	Minimum Operating Temperature	-20°C
	Terminal Type	Screw
	Length	90mm
	Width	17.5mm
	Dimensions	90 x 17.5 x 90mm
	Number of Poles	1

	모두 선택
	브랜드 Omron
	Monitoring Application Voltage
	Electrical Phase 1
	Voltage Sensing Range 200 V, 300 V, 600 V
	Contact Configuration SPST
	Voltage Sensitivity Overvoltage, Undervoltage
	Mounting Type DIN Rail
	Time Delay 250ms
	Series K8DT-VS
	Operating Temperature Range +60°C
	Maximum Voltage Sensed 200 V, 300 V, 600V
	Height 90mm
	Maximum Operating Temperature +60°C
	Minimum Operating Temperature -20°C
	Terminal Type Screw
	Length 90mm
	Width 17.5mm
	Dimensions 90 x 17.5 x 90mm
	Number of Poles 1

English Datasheet

COO (Country of Origin):: CN

K8DT-VS Single Phase Under/Over Voltage Relay

Omron K8DT-VS single phase voltage monitor relay detects abnormal voltages applies to equipment to protect against equipment failure. Can be used in either overvoltage or undervoltage mode.

Monitor AC or DC currents with one Relay.
Settings for the operating value, hysteresis, and operating time
Width of 17.5 mm to reduce space required in panels
Push-In Plus Terminal that reduce wiring work
Double-insertion holes for crossover wiring (all terminals)

K8DT-VS Single-Phase Voltage Monitoring Relay.

• Downsize control panels.
• Reduced wiring.
• Detects errors in Motors and other equipment.
• Use in either over current or under current mode.
• Function as an alarm.
• Set threshold values.
• Alarm output can be set as a relay or transistor output.
• Input signal – Voltage, current, water level electrode and temperature (thermocouple or platinum resistance thermometer) can be input.
• Lower power consumption.
• Side by side mounting is possible.
• Long term contact reliability.
• Reliable in poor noise environments.
• Slim profile 17.5 mm

K8DT-VS3TD Single Phase Voltage Relay.

• Power supply 24 V ac/dc.
• Detects abnormal voltages
• Use in over voltage or under voltage mode
• Protects you from equipment failures.
• Transistor output
• Single phase.
• Power ON lock time 1 s or 5 s (switched using DIP switch)
• Current capacity 10 A (per pole)
• Insertions 50 times.
• Setting range – 20 to 200 V ac/dc, 30 to 300 V ac/dc, 60 to 600 V ac/dc

Features and Benefits.

• Automatic / Manual reset (switchable) (Manual reset turn OFF the power supply)
• Green LED Power (PWR) power
• Yellow LED Relay output (RY)
• Red LED output (ALM) alarm
• DIN Rail Mounted or Screw Mounted.
• Weight 100 g
• Case material PC, UL 94 V-0.
• Colour N1.5
• Protection IP20 (terminals)

What is a Monitoring / Measuring Relay?

A monitoring / measuring relay is a protective control device, various types are available suiting what you wish to monitor. The relays receive input signals then monitor them and then output an alarm signal when a set value is reached (alarm relays). The relays protect your equipment against over voltage and over current faults. Monitoring relays monitor AC power supplies, voltage and current, analogue signals detecting unusual activity in equipment against set alarm thresholds.

Types of Monitoring Relays Available?

• Motor protection relays
• Temperature monitoring relays
• Water level control relays
• Voltage
• Current

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

Standards

EN60947-5-1, IP 20 Terminals

Omron K8DT Series Control Relays

Omron K8DT measuring and monitoring relays are part of the Value Design for Panel concept that takes control panel design and manufacturing to a new level. The K8DT series protect important equipment from damage using various measuring and monitoring relays that conform to international safety standards. Low power consumption and low heat generation design offer a long service life.

Space Saving

The K8DT series can help downsize control panels by reducing the width between wiring ducts and void panel space. The slim body allows space to mount more devices in the same size of control panel to increase control panel functionality.

Push-In Plus Terminals

Push-In Plus terminal blocks on all K8DT relays reduce the time and work involved in wiring. The Push-In Plus terminals allow solid and stranded wires with pin terminals or ferrules to be inserted without the need for tools.