Omron Monitoring Relay, 1 Phase, SPST, DIN Rail, 10A to 200A, 0 V ac, 0V ac

RS 제품 번호:: 111-3098
제조사 부품 번호:: K8DT-AS3TD
제조업체:: Omron

Omron Monitoring Relay, 1 Phase, SPST, DIN Rail, 10A to 200A, 0 V ac, 0V ac

Subtotal (1 unit)*

₩300,020.00

현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩300,020.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 111-3098
제조사 부품 번호:: K8DT-AS3TD
제조업체:: Omron

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Omron
	Product Type	Monitoring Relay
	Electrical Phase	1
	Contact Configuration	SPST
	Mount Type	DIN Rail
	Minimum Current Sensed	10A
	Power Consumption	1.8VA
	Maximum Current Sensed	200A
	Current Sensitivity	Undercurrent, Overcurrent
	Terminal Type	Push-in
	IP Rating	IP20
	Time Delay	250 ms
	Relay Contact Current	10, 200A
	Supply DC Voltage	0 V ac
	Minimum Operating Temperature	-20°C
	Supply AC Voltage	0V ac
	Maximum Operating Temperature	60°C
	Width	17.5mm
	Standards/Approvals	EN 60947-5-1, UL 60947-5-1, RoHS
	Height	90mm
	Length	90mm
	Series	K8DT-AS

	모두 선택
	브랜드 Omron
	Product Type Monitoring Relay
	Electrical Phase 1
	Contact Configuration SPST
	Mount Type DIN Rail
	Minimum Current Sensed 10A
	Power Consumption 1.8VA
	Maximum Current Sensed 200A
	Current Sensitivity Undercurrent, Overcurrent
	Terminal Type Push-in
	IP Rating IP20
	Time Delay 250 ms
	Relay Contact Current 10, 200A
	Supply DC Voltage 0 V ac
	Minimum Operating Temperature -20°C
	Supply AC Voltage 0V ac
	Maximum Operating Temperature 60°C
	Width 17.5mm
	Standards/Approvals EN 60947-5-1, UL 60947-5-1, RoHS
	Height 90mm
	Length 90mm
	Series K8DT-AS

English Datasheet

Omron K8DT-AS Series Monitoring Relay, 10A Relay Contact Current, 250ms Time Delay - K8DT-AS3TD

This monitoring relay detects and responds to deviations in current so single‑phase installations maintain defined operating conditions. It is designed for rail mounting in control cabinets and provides timed switching to protect equipment against both low and high current events while operating across a wide ambient temperature range.

Features and Benefits:

• Detects current from 10A to 200A, ensuring adjustable sensing coverage
• Provides undercurrent and overcurrent detection to prevent fault conditions
• Implements a 250 MS time delay to avoid nuisance switching
• Uses push‑in terminals for fast, tool‑free wiring
• Employs SPST contact configuration for straightforward control integration
• Consumes 1.8 VA, ensuring low auxiliary power draw during operation

Applications

• Suitable for motor protection circuits where current limits must be monitored
• Ideal for monitoring branch circuits in industrial automation panels
• Used with single‑phase distribution systems for load supervision
• Can be used for preventative maintenance alarms on critical equipment

What environmental range can I expect during installation and operation?

It operates between -20 °C and 60 °C, so it is suitable for many indoor industrial environments but not for outdoor exposure beyond its enclosure rating.

How is it mounted within a control cabinet?

The unit is intended for DIN‑rail mounting, enabling quick installation alongside other modular control devices.

What protection rating does the enclosure provide against ingress?

The device has an IP20 rating, which protects against finger contact but not against liquids or fine dust ingress.

What standards does the product meet for electrical control use?

It conforms to EN 60947‑5‑1 and UL 60947‑5‑1 and is RoHS‑compliant, aligning with recognised control relay requirements.

What are the switching capability limits of the relay contact?

The relay contact is rated for switching currents including a nominal 10A and a maximum sensed current of 200A for detection purposes.

Note

K8DT-AS allow use in either overcurrent or undercurrent mode.
K8DT-AW allow overcurrent and undercurrent monitoring simultaneously

Standards

EN 60947-5-1, UL 60947-5-1, IP 20 Terminals