제조사부품번호

Omron Monitoring Relay, 1 Phase, SPST, DIN Rail, 0.1A to 5A, 0V ac

RS 제품 번호:: 111-3093
제조사 부품 번호:: K8DT-AS2TA
제조업체:: Omron

Omron Monitoring Relay, 1 Phase, SPST, DIN Rail, 0.1A to 5A, 0V ac

Subtotal (1 unit)*

₩271,557.00

일시적 품절

2026년 8월 05일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩271,557.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 111-3093
제조사 부품 번호:: K8DT-AS2TA
제조업체:: Omron

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Omron
	Product Type	Monitoring Relay
	Electrical Phase	1
	Contact Configuration	SPST
	Mount Type	DIN Rail
	Minimum Current Sensed	0.1A
	Power Consumption	2.5VA
	Maximum Current Sensed	5A
	Current Sensitivity	Overcurrent, Undercurrent
	Terminal Type	Push-in
	Time Delay	250 ms
	IP Rating	IP20
	Supply AC Voltage	0V ac
	Minimum Operating Temperature	-20°C
	Relay Contact Current	0.1, 5A
	Maximum Operating Temperature	60°C
	Series	K8DT-AS
	Width	17.5mm
	Length	90mm
	Height	90mm
	Standards/Approvals	RoHS, EN 60947-5-1, UL 60947-5-1

	모두 선택
	브랜드 Omron
	Product Type Monitoring Relay
	Electrical Phase 1
	Contact Configuration SPST
	Mount Type DIN Rail
	Minimum Current Sensed 0.1A
	Power Consumption 2.5VA
	Maximum Current Sensed 5A
	Current Sensitivity Overcurrent, Undercurrent
	Terminal Type Push-in
	Time Delay 250 ms
	IP Rating IP20
	Supply AC Voltage 0V ac
	Minimum Operating Temperature -20°C
	Relay Contact Current 0.1, 5A
	Maximum Operating Temperature 60°C
	Series K8DT-AS
	Width 17.5mm
	Length 90mm
	Height 90mm
	Standards/Approvals RoHS, EN 60947-5-1, UL 60947-5-1

COO (Country of Origin):: CN

Omron K8DT-AS Series Monitoring Relay, 5A Maximum Current Sensed, 0.1A Minimum Current Sensed - K8DT-AS2TA

This monitoring relay detects and responds to abnormal single‑phase current conditions, providing protection against both overcurrent and undercurrent scenarios in industrial control systems. It is engineered for DIN‑rail installation and integrates with automation and electrical setups to monitor load continuity and trigger control circuits when measured current falls outside set thresholds.

Features and Benefits:

• Sensitivity range 0.1A to 5A providing precise current detection
• Single‑pole single‑throw contact offering straightforward switching action
• 250ms time delay preventing nuisance trips from short transients
• Push‑in terminals enabling Rapid tool‑free wiring connections
• Low power draw of 2.5VA reducing supply loading during operation
• IP20 enclosure suitable for standard protected electrical cabinets

Applications

• Suitable for motor load supervision to flag underload conditions
• Ideal for pump systems to detect dry‑run or overload situations
• Used with control panels to monitor branch circuit currents
• Can be used for conveyor systems to indicate stall or overload
• Suitable for factory automation where a Compact footprint is required

What mounting method does it require?

It clips onto a DIN rail for standard control‑cabinet installation and retention.

What electrical phase is monitored?

It monitors a single electrical phase for current surveillance tasks.

What Terminal type is provided for field wiring?

Push‑in terminals accept conductors for quick and secure connection without screws.

What environmental temperature range supports reliable operation?

It operates between −20°C and 60°C to cover common industrial ambient conditions.

Note

K8DT-AS allow use in either overcurrent or undercurrent mode.
K8DT-AW allow overcurrent and undercurrent monitoring simultaneously

Standards

EN 60947-5-1, UL 60947-5-1, IP 20 Terminals