Honeywell GLC Series Plunger Limit Switch, 1 NC/1 NO, IP66, Die Cast Zinc Housing, 240V ac, 6A

RS 제품 번호:: 308-1793
Distrelec 제품 번호:: 136-30-548
제조사 부품 번호:: GLCB01B
제조업체:: Honeywell

Honeywell GLC Series Plunger Limit Switch, 1 NC/1 NO, IP66, Die Cast Zinc Housing, 240V ac, 6A

Subtotal (1 unit)*

₩165,457.50

59 개 단위 배송 준비 완료
추가로 2026년 6월 02일 부터 48 개 단위 배송
추가로 2026년 7월 24일 부터 13 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩165,457.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 308-1793
Distrelec 제품 번호:: 136-30-548
제조사 부품 번호:: GLCB01B
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Actuator Type	Plunger
	Product Type	Limit Switch
	IP Rating	IP66
	Contact Configuration	1 NC/1 NO
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	6A
	Series	GLC
	Switching AC Voltage	240V ac
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Width	30.5mm
	Length	68.5mm
	Standards/Approvals	UL, CSA, CE, CCC
	Depth	26.35mm
	Hazardous Area Certification	No
	Mechanical Life	10000000Cycles
	Conduit Entry	PG13.5
	Operating Force	16N

	모두 선택
	브랜드 Honeywell
	Actuator Type Plunger
	Product Type Limit Switch
	IP Rating IP66
	Contact Configuration 1 NC/1 NO
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 6A
	Series GLC
	Switching AC Voltage 240V ac
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Width 30.5mm
	Length 68.5mm
	Standards/Approvals UL, CSA, CE, CCC
	Depth 26.35mm
	Hazardous Area Certification No
	Mechanical Life 10000000Cycles
	Conduit Entry PG13.5
	Operating Force 16N

COO (Country of Origin):: GB

Honeywell GLC Series Limit Switch, 240V AC Switching Voltage, 6A Switching Current - GLCB01B

This limit switch is a mechanically actuated device designed to detect position changes and provide discrete electrical switching in industrial control systems. It is built for demanding environments and offers a Compact footprint with a plunger actuator that converts linear motion into a snap‑action contact change. The product is suitable for integration into automation, electrical and mechanical assemblies where robust end‑of‑travel signalling is required.

Features and Benefits:

• Snap‑action contacts provide quick make‑and‑break switching for precise control
• 1NC and 1NO configuration enables both normally closed and open circuits
• IP66 ingress protection allows operation in wet and dusty environments
• Electrostatic epoxy‑coated zinc housing resists corrosion in harsh locations
• 16 N operating force ensures consistent actuation response under load
• Rated for 240V AC at 6A to handle common control voltages and currents

Applications

• Suitable for conveyor end‑of‑travel detection in production lines
• Ideal for limit sensing on industrial presses and actuators
• Used with motor starters for safety interlock monitoring
• Can be used for position feedback on packaging machinery

What electrical switching capability can I expect for control circuits?

It switches up to 240V AC and carries a maximum current of 6 A, accommodating typical control and signalling loads.

How does the device cope with temperature extremes on‑site?

The unit operates across a range from −40 to 85 °C, allowing use in cold‑store to warm‑process conditions without performance degradation.

What mechanical endurance does it offer for high‑cycle applications?

Mechanical life is rated at 10,000,000 cycles, making it appropriate for frequent actuation scenarios.

Which installation Interface does it provide for wiring entry?

The enclosure accepts a PG13.5 conduit entry for secure cable or conduit connection.

Are there recognised standards that the device meets for industrial deployment?

It holds approvals under UL, CSA, CE and CCC, supporting use where those certifications are required.

Approvals

UL; CSA

Standards

EN 50047