Honeywell GLC Series Rotary Lever Limit Switch, 1 NC/1 NO, IP66, Die Cast Zinc Housing, 240V ac, 6A

This limit switch is a Compact mechanical actuator designed to detect position changes and control circuits in industrial systems. It is built for demanding environments where a robust enclosure and clear changeover contacts are required, and it operates effectively across a wide ambient temperature range.

• IP66 enclosure provides protection against dust and powerful water jets
• Snap-action contacts deliver decisive electrical switching response
• 1NC1NO contact configuration supports changeover control circuits
• Rated for 240V AC at 6A to handle common control loads
• Mechanical endurance of 10,000,000 cycles for long service intervals
• Operating torque of 0.12 Nm enables sensitive actuation

• Suitable for end-of-travel detection on conveyor systems
• Ideal for limit sensing on industrial presses and machinery
• Used with control panels requiring clear changeover inputs
• Can be used for safety interlocks in manufacturing lines

The body is MADE from zinc with an electrostatic epoxy coating to improve surface durability and resist common industrial exposure.

A PG13.5 conduit entry is fitted to accept standard threaded cable glands and simplify wiring.

It is specified to operate down to -40°C and up to 85°C, maintaining mechanical and electrical function across this span.

The unit carries UL, CCC, CE and CSA approvals indicating conformity with several international standards.

The construction presents a slim profile with a depth of 26.35 mm, a width of 30.5mm and a length of 68.5mm to suit confined installations.

UL/ UL listed for Canada

GLC and GLD limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.