제조사부품번호

Honeywell LS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V, 10A

RS 제품 번호:: 217-7109
제조사 부품 번호:: 1LS243-4PG
제조업체:: Honeywell

Honeywell LS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V, 10A

Subtotal (1 unit)*

₩730,957.50

현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

수량	한팩당
1 +	₩730,957.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 217-7109
제조사 부품 번호:: 1LS243-4PG
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	Contact Configuration	SPDT
	IP Rating	IP67
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Terminal Type	Screw
	Switching Current	10A
	Series	LS
	Switching AC Voltage	240V
	Minimum Operating Temperature	-29°C
	Maximum Operating Temperature	+120°C
	Depth	44mm
	Length	79mm
	Standards/Approvals	RoHS
	Width	35mm
	Hazardous Area Certification	No
	Operating Force	0.51Nm
	Mounting Orientation	Side
	Mechanical Life	10000000Cycles
	Conduit Entry	PG13.5

	모두 선택
	브랜드 Honeywell
	Actuator Type Roller Lever
	Product Type Limit Switch
	Contact Configuration SPDT
	IP Rating IP67
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Terminal Type Screw
	Switching Current 10A
	Series LS
	Switching AC Voltage 240V
	Minimum Operating Temperature -29°C
	Maximum Operating Temperature +120°C
	Depth 44mm
	Length 79mm
	Standards/Approvals RoHS
	Width 35mm
	Hazardous Area Certification No
	Operating Force 0.51Nm
	Mounting Orientation Side
	Mechanical Life 10000000Cycles
	Conduit Entry PG13.5

Honeywell Limit Switch, Side Rotary Actuator, 20mm Conduit Entry - 1LS243-4PG

This limit switch is a compact, industrial position sensor designed for mechanical control and safety monitoring in automation systems. It provides reliable actuation via a side rotary mechanism and is intended for installations where a small footprint and robust environmental protection are required.

Features and Benefits:

• IP67-rated enclosure for use in wet or dusty environments
• Die-cast zinc housing for improved impact endurance
• SPDT snap-action contacts for clear single-change switching
• Screw terminals for secure, retrievable wiring connections
• Switching capability up to 10A at 480V for mains-level loads
• Mechanical durability rated to 10 million cycles for long service life

Applications

• Suitable for conveyor end-of-travel detection in factories
• Ideal for limit sensing on packaging machinery
• Used with gate and barrier position monitoring systems
• Can be used for actuator end-stop feedback in assembly lines
• Suitable for use in outdoor enclosures requiring sealed entries

What conduit provisions are available for cable entry?

A 20mm conduit entry is provided to accept standard threaded conduit or glands for routed wiring.

How does the actuator orientation affect installation?

The device is designed for side mounting, with the rotary actuator positioned for lateral actuation in constrained spaces.

What temperature range can it operate within?

It is rated for operation between -10°C and 80°C to suit typical industrial ambient conditions.

What type of electrical termination is used for connections?

Screw-type terminals allow straightforward connection and maintenance with standard tools.

Are there any regulatory material considerations?

The product conforms to RoHS requirements regarding restricted substances in its materials.