Telemecanique Sensors XCMH Series Rod Limit Switch, 1 NO/1 NC, IP67, IP66, Plastic Housing, 240V ac, 0.75A

RS 제품 번호:: 194-154
제조사 부품 번호:: XCMH2159L1
제조업체:: Telemecanique Sensors

Telemecanique Sensors XCMH Series Rod Limit Switch, 1 NO/1 NC, IP67, IP66, Plastic Housing, 240V ac, 0.75A

Subtotal (1 unit)*

₩82,380.00

10 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩82,380.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 194-154
제조사 부품 번호:: XCMH2159L1
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Actuator Type	Rod
	Product Type	Limit Switch
	IP Rating	IP67, IP66
	Contact Configuration	1 NO/1 NC
	Housing Material	Plastic
	Contact Type	Snap Action
	Terminal Type	Cable
	Switching Current	0.75A
	Series	XCMH
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Width	30mm
	Standards/Approvals	IEC 60204-1, IEC 60947-5-1, UL 508, CSA C22.2 No 14
	Length	16mm
	Depth	232mm
	Hazardous Area Certification	No
	Mechanical Life	5000000Cycles
	Operating Force	0.1N

	모두 선택
	브랜드 Telemecanique Sensors
	Actuator Type Rod
	Product Type Limit Switch
	IP Rating IP67, IP66
	Contact Configuration 1 NO/1 NC
	Housing Material Plastic
	Contact Type Snap Action
	Terminal Type Cable
	Switching Current 0.75A
	Series XCMH
	Minimum Operating Temperature -25°C
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Width 30mm
	Standards/Approvals IEC 60204-1, IEC 60947-5-1, UL 508, CSA C22.2 No 14
	Length 16mm
	Depth 232mm
	Hazardous Area Certification No
	Mechanical Life 5000000Cycles
	Operating Force 0.1N

Datasheet - XCMH2159L1

COO (Country of Origin):: ID

Telemecanique Sensors XCMH Series Limit Switch, IP67/IP66 Ingress Protection, 0.75A Switching Current - XCMH2159L1

This limit switch is a rod-actuated industrial device designed to detect position changes and actuate control circuits in demanding environments. It features a plastic enclosure and snap-action contacts to provide quick, repeatable switching for automation and safety applications. The unit is suited to installations where a compact, low-force actuator and cable termination are required.

Features and Benefits:

• Rod actuator with 0.1N operating force for delicate detection
• Snap-action contacts delivering 0.75A switching current for crisp response
• Dual-voltage capability at 250V DC and 240V AC for flexible system integration
• Contact arrangement 1NO/1NC enabling both make-and-break functions
• Mechanical endurance rated to 5,000,000 cycles for extended service life
• IP66/IP67 ingress protection for use in wet or dusty zones

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for door position sensing in industrial enclosures
• Used with packaging machines requiring low-force actuation
• Can be used for safety interlocks on access panels
• Appropriate for actuating control relays in test rigs

How is the switch wired into a control system?

The unit uses a cable termination with separately accessible conductors for connection to control circuits and requires wiring of the 1NO and 1NC contacts according to the intended logic.

What temperature range can it operate within?

It functions reliably between -25°C and 70°C, allowing deployment in moderately cold to warm industrial environments.

Which standards does it conform to for electrical and safety design?

It meets IEC 60204-1, IEC 60947-5-1, UL 508 and CSA C22.2 No. 14 specifications for electrical equipment and switch performance.

What construction detail affects environmental resilience?

The plastic housing minimises corrosion risk and, combined with the rated ingress protection, permits use where moisture or particulates are present.