Telemecanique Sensors XCMH Series Plunger Limit Switch, 1 NO/1 NC, IP67, IP66, Plastic Housing, 240V ac, 0.75A

RS 제품 번호:: 194-129
제조사 부품 번호:: XCMH211AL1
제조업체:: Telemecanique Sensors

Telemecanique Sensors XCMH Series Plunger Limit Switch, 1 NO/1 NC, IP67, IP66, Plastic Housing, 240V ac, 0.75A

Subtotal (1 unit)*

₩94,220.00

추가로 2026년 8월 17일 부터 4 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩94,220.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 194-129
제조사 부품 번호:: XCMH211AL1
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Actuator Type	Plunger
	Product Type	Limit Switch
	Contact Configuration	1 NO/1 NC
	IP Rating	IP67, IP66
	Housing Material	Plastic
	Contact Type	Snap Action
	Switching Current	0.75A
	Terminal Type	Cable
	Series	XCMH
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	300V dc
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Depth	94mm
	Length	16mm
	Standards/Approvals	UL 508 IEC 60947-5-1 CSA C22.2 No 14 IEC 60204-1
	Width	30mm
	Hazardous Area Certification	No
	Conduit Entry	M20
	Operating Force	0.5N
	Mechanical Life	5000000Cycles

	모두 선택
	브랜드 Telemecanique Sensors
	Actuator Type Plunger
	Product Type Limit Switch
	Contact Configuration 1 NO/1 NC
	IP Rating IP67, IP66
	Housing Material Plastic
	Contact Type Snap Action
	Switching Current 0.75A
	Terminal Type Cable
	Series XCMH
	Minimum Operating Temperature -25°C
	Switching DC Voltage 300V dc
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Depth 94mm
	Length 16mm
	Standards/Approvals UL 508 IEC 60947-5-1 CSA C22.2 No 14 IEC 60204-1
	Width 30mm
	Hazardous Area Certification No
	Conduit Entry M20
	Operating Force 0.5N
	Mechanical Life 5000000Cycles

Datasheet - XCMH211AL1

COO (Country of Origin):: ID

Telemecanique Sensors XCMH Series Limit Switch, IP67/IP66 Ingress Protection, 0.75A Switching Current - XCMH211AL1

This limit switch is a plunger-actuated industrial sensor designed to detect mechanical position changes in demanding environments. It offers snap-action contacts and a cable terminal for straightforward wiring, housed in a plastic enclosure that provides ingress protection suitable for exposed installations. The device operates across a wide temperature range and is intended for applications requiring frequent cycling and defined switching behaviour.

Features and Benefits:

• Snap-action contact delivers fast, repeatable electrical transition
• 0.5N operating force enables sensitive actuation with low trigger effort
• Rated switching up to 300V DC for high-voltage DC circuits
• Maximum switching current 0.75A supports moderate load switching
• Mechanical endurance of 5,000,000 cycles for continuous-duty applications
• Conduit entry M20 allows standard cable gland installation

Applications

• Suitable for conveyor end-of-travel detection in factories
• Ideal for interlock sensing on machine guards and doors
• Used with DC control circuits requiring 300V DC switching
• Can be used for position feedback in automated packaging lines
• Appropriate for assembly-line stations with high actuation counts

What contact arrangement does it provide for control logic?

It features one normally open and one normally closed contact to enable both make and break signalling in control circuits.

How does the enclosure handle wet or dusty conditions?

The housing meets IP66 and IP67 ingress levels, providing protection against heavy spray and temporary immersion when properly installed.

What temperature extremes can it withstand during operation?

It operates reliably from -25°C up to 70°C, accommodating cold storage and warm plant-floor environments.

What standards govern its electrical and safety characteristics?

It is manufactured to conform with UL508, IEC 60947-5-1, CSA C22.2 No 14 and IEC 60204-1 requirements.