Telemecanique Sensors XCMH Series Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V ac, 0.75A

RS 제품 번호:: 194-148
제조사 부품 번호:: XCMH2110L1
제조업체:: Telemecanique Sensors

Telemecanique Sensors XCMH Series Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V ac, 0.75A

Subtotal (1 unit)*

₩75,660.00

47 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩75,660.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 194-148
제조사 부품 번호:: XCMH2110L1
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Product Type	Limit Switch
	Actuator Type	Plunger
	IP Rating	IP66, IP67
	Contact Configuration	1 NO/1 NC
	Housing Material	Plastic
	Contact Type	Snap Action
	Terminal Type	Cable
	Switching Current	0.75A
	Series	XCMH
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	70°C
	Length	16mm
	Standards/Approvals	CSA C22.2 No 14, IEC 60204-1, IEC 60947-5-1, UL 508
	Width	30mm
	Depth	60mm
	Hazardous Area Certification	No
	Operating Force	42.5N
	Mechanical Life	5000000Cycles

	모두 선택
	브랜드 Telemecanique Sensors
	Product Type Limit Switch
	Actuator Type Plunger
	IP Rating IP66, IP67
	Contact Configuration 1 NO/1 NC
	Housing Material Plastic
	Contact Type Snap Action
	Terminal Type Cable
	Switching Current 0.75A
	Series XCMH
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -25°C
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 70°C
	Length 16mm
	Standards/Approvals CSA C22.2 No 14, IEC 60204-1, IEC 60947-5-1, UL 508
	Width 30mm
	Depth 60mm
	Hazardous Area Certification No
	Operating Force 42.5N
	Mechanical Life 5000000Cycles

Datasheet - XCMH2110L1

COO (Country of Origin):: ID

Telemecanique Sensors XCMH Series Limit Switch, IP66/IP67 Ingress Protection, 0.75A Switching Current - XCMH2110L1

This limit switch provides electro-mechanical position sensing for industrial machinery where a compact, robust actuation device is required. Fitted with a plunger actuator and designed for use outside hazardous zones, it offers a straightforward means to detect and break or make circuits in control systems. The unit connects via a fixed cable and complies with recognised electrical machinery safety standards.

Features and Benefits:

• 1 NO/1 NC snap-action contact for precise state change
• 42.5N operating force enabling consistent actuation response
• 0.75A switching current suitable for control signal circuits
• Rated for 250V DC and 240V AC accommodating varied supplies
• Mechanical endurance of 5,000,000 cycles reducing maintenance intervals
• IP66, IP67 waterproof plastic housing for washdown and dust protection

Applications

• Suitable for end-of-travel detection on conveyor stops
• Ideal for position sensing on packaging machinery
• Used with light-duty motor starters and control relays
• Can be used for gate and access interlocks in factories
• Suitable for repeated cycling in assembly lines

What terminals are provided for electrical connection?

A permanently attached cable serves as the terminal method, eliminating screw terminals and simplifying installation where cable routing is required.

What climatic range can it operate within?

It functions across an ambient span from -25°C to 70°C, allowing use in cold storage peripheral equipment and warm plant areas.

Which compliance standards govern its electrical and mechanical safety?

It meets CSA C22.2 No. 14, IEC 60204-1, IEC 60947-5-1 and UL 508 requirements for industrial switchgear applications.

What housing material and protection level suit harsh environments?

The enclosure is moulded plastic and carries ingress protection to IP66 and IP67, permitting temporary immersion and high-pressure washdown conditions.