Telemecanique Sensors XCMH Series Roller Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V, 0.75A

RS 제품 번호:: 194-093
제조사 부품 번호:: XCMH2102L8
제조업체:: Telemecanique Sensors

Telemecanique Sensors XCMH Series Roller Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V, 0.75A

Subtotal (1 unit)*

₩143,440.00

제조사가 재고 비축중

2027년 1월 15일 부터 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩143,440.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 194-093
제조사 부품 번호:: XCMH2102L8
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Product Type	Limit Switch
	Actuator Type	Roller Plunger
	IP Rating	IP66, IP67
	Contact Configuration	1 NO/1 NC
	Housing Material	Plastic
	Contact Type	Snap Action
	Switching Current	0.75A
	Terminal Type	Cable
	Series	XCMH
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	240V
	Switching DC Voltage	300V dc
	Maximum Operating Temperature	70°C
	Width	30mm
	Length	16mm
	Standards/Approvals	CSA C22.2 No 14 IEC 60947-5-1 UL 508 IEC 60204-1
	Depth	70.4mm
	Hazardous Area Certification	No
	Mechanical Life	5000000Cycles
	Conduit Entry	M20
	Operating Force	35N

	모두 선택
	브랜드 Telemecanique Sensors
	Product Type Limit Switch
	Actuator Type Roller Plunger
	IP Rating IP66, IP67
	Contact Configuration 1 NO/1 NC
	Housing Material Plastic
	Contact Type Snap Action
	Switching Current 0.75A
	Terminal Type Cable
	Series XCMH
	Minimum Operating Temperature -25°C
	Switching AC Voltage 240V
	Switching DC Voltage 300V dc
	Maximum Operating Temperature 70°C
	Width 30mm
	Length 16mm
	Standards/Approvals CSA C22.2 No 14 IEC 60947-5-1 UL 508 IEC 60204-1
	Depth 70.4mm
	Hazardous Area Certification No
	Mechanical Life 5000000Cycles
	Conduit Entry M20
	Operating Force 35N

Datasheet - XCMH2102L8

COO (Country of Origin):: ID

Telemecanique Sensors XCMH Series Limit Switch, IP66/IP67 Ingress Protection, 0.75A Switching Current - XCMH2102L8

This limit switch is a compact electromechanical device designed to detect position changes and initiate control signals in industrial settings. Housed in a durable plastic enclosure and operated via a roller plunger actuator, it is intended for machinery interface and automated control tasks where robust switching and environmental protection are required.

Features and Benefits:

• Snap-action contacts for rapid switching response and reduced contact wear
• 0.75A switching current to handle low-power control circuits
• 300V DC switching capability for DC control applications
• 240V AC switching rating for alternating-voltage systems
• 35N operating force for predictable actuation effort
• Mechanical life rated to 5,000,000 cycles for extended operational duty

Applications

• Suitable for conveyor position sensing in production lines
• Used with industrial gates and doors for end-of-travel detection
• Ideal for automation panels requiring cable termination
• Can be used for safety interlocks on packaging machinery
• Suitable for actuator feedback in material handling systems

What terminal arrangement is provided for wiring?

The unit uses a cable-terminal configuration for fixed wiring installations, avoiding screw-terminal connections.

What environmental protection does it offer?

It carries IP66 and IP67 degrees of protection, enabling resistance to dust ingress and temporary immersion in water.

Which conduit size is compatible with its entry point?

The enclosure accepts an M20 conduit entry to integrate with standard industrial conduit runs.

What contact configuration and switching behaviour can I expect?

It provides a single normally open and normally closed contact set with snap-action switching for decisive state changes.