Telemecanique Sensors XCMH Series Roller Plunger Limit Switch, 1 NO/1 NC, IP67, IP66, Plastic Housing, 240V ac, 0.75A

RS 제품 번호:: 194-142
제조사 부품 번호:: XCMH2102L5
제조업체:: Telemecanique Sensors

Telemecanique Sensors XCMH Series Roller Plunger Limit Switch, 1 NO/1 NC, IP67, IP66, Plastic Housing, 240V ac, 0.75A

Subtotal (1 unit)*

₩120,980.00

16 개 단위 배송 준비 완료
추가로 2026년 8월 14일 부터 20 개 단위 배송
추가로 2026년 8월 28일 부터 20 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩120,980.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 194-142
제조사 부품 번호:: XCMH2102L5
제조업체:: Telemecanique Sensors

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Telemecanique Sensors
	Actuator Type	Roller Plunger
	Product Type	Limit Switch
	IP Rating	IP67, IP66
	Contact Configuration	1 NO/1 NC
	Housing Material	Plastic
	Contact Type	Snap Action
	Switching Current	0.75A
	Terminal Type	Cable
	Series	XCMH
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Depth	70.4mm
	Width	30mm
	Length	16mm
	Standards/Approvals	CSA C22.2 No 14, UL 508, IEC 60947-5-1, IEC 60204-1
	Hazardous Area Certification	No
	Operating Force	35N
	Mechanical Life	5000000Cycles

	모두 선택
	브랜드 Telemecanique Sensors
	Actuator Type Roller Plunger
	Product Type Limit Switch
	IP Rating IP67, IP66
	Contact Configuration 1 NO/1 NC
	Housing Material Plastic
	Contact Type Snap Action
	Switching Current 0.75A
	Terminal Type Cable
	Series XCMH
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Depth 70.4mm
	Width 30mm
	Length 16mm
	Standards/Approvals CSA C22.2 No 14, UL 508, IEC 60947-5-1, IEC 60204-1
	Hazardous Area Certification No
	Operating Force 35N
	Mechanical Life 5000000Cycles

Datasheet - XCMH2102L5

COO (Country of Origin):: ID

Telemecanique Sensors XCMH Series Limit Switch, IP67/IP66 Ingress Protection, 0.75A Switching Current - XCMH2102L5

This limit switch is a compact mechanical device designed to provide reliable position detection in industrial systems. It employs a roller plunger actuator housed in a plastic enclosure with protection against dust and water ingress, and is intended for installations where a small footprint and straightforward cable connection are required.

Features and Benefits:

• Snap-action contacts deliver quick switching response
• Rated switching at 250V DC for low-voltage DC control
• 240V AC switching capability supports AC control circuits
• Contact current handling of 0.75A for small loads
• Operating force of 35N ensures positive actuation
• Mechanical endurance of 5,000,000 cycles for long service life

Applications

• Used for end-of-travel detection on automated conveyors
• Suitable for position sensing on industrial doors
• Ideal for monitoring linear actuators in machines
• Can be used for safety interlocks on guards and hatches
• Used with small motors and relays in control panels

What contact arrangements are available and how do they operate?

The device provides one normally open and one normally closed contact in a snap-action configuration, enabling both make and break signalling from a single actuator stroke.

How is the switch wired into a control system?

The unit features a cable terminal for direct cable connection to control circuitry, allowing straightforward installation without separate terminal blocks.

What environmental temperatures can it tolerate during operation?

It operates reliably within a range from -25°C up to 70°C, suitable for many indoor and sheltered outdoor industrial environments.

What approvals support its use in industrial equipment?

It meets recognised standards including CSA C22.2 No 14, UL 508, IEC 60947-5-1 and IEC 60204-1 for electrical safety and industrial control compatibility.