Broadcom AFBR-POMEK2204 Laser Module 818 nm 2 W Diode, 11 (0.15-ohm resistor), Current Control & Monitor J1 (16 pin)

모든 Laser Modules 열람하기

Subtotal (1 unit)*

₩2,551,254.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 2 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩2,551,254.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
245-7534
제조사 부품 번호:
AFBR-POMEK2204
제조업체:
Broadcom
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Broadcom

Product Type

Laser Module

Laser Type

Diode

Laser Wavelength

818nm

Optical Output Power

2W

Control Type

11 (0.15-ohm resistor), Current Control & Monitor J1 (16 pin) PIN: 1 & 3

Laser Class

Class 4 Iec60825-1

Minimum Operating Temperature

15°C

Maximum Operating Temperature

45°C

Standards/Approvals

RoHS

Maximum Supply Voltage

5V

Automotive Standard

No

Series

AFBR-POMEK2204

Supply Current

3A

Minimum Supply Voltage

5V

COO (Country of Origin):
US
Broadcom eval kit AFBR-POMEK2204, supports 2W laser, AFBR-POL2120. The kit, which incorporates the 2W laser, features a controllable current source to adjust the laser light output.

A full power-over-fiber link is conveniently achieved by coupling to one of Broadcom’s optical power converters (AFBR-POC204L or AFBR-POC206L). Broadcom’s highly efficient optical power converters are well known for delivering 100% galvanically isolated power in industrial applications. With the 2W laser, Broadcom now provides the complete solution. The AFBR-POMEK2204 delivers up to 2W of laser light output power that is controlled via an easily accessible 16-pin connector.

A 5V voltage supply is all that is needed to operate the evaluation kit. The laser drive current can be controlled to ramp up to constant or pulsed power and maintain that power. The laser pigtail is terminated with an FC connector that matches Broadcom’s optical power converter.

The 2W laser falls under Class 4 (IEC60825-1), and the kit should never be operated without an optical power converter connected at the end of the fiber pigtail. Using a closed loop with continuous feedback, Class 1A laser classification is feasible.

Features


• Output power: Up to 2W over the operating temperature range

• Small footprint housing

• Operating temperature: +15°C to +45°C

• FC/PC port: MM fiber 62.5-μm, 105-μm, and 200-μm core diameter

• Electrical pins (anode and cathode) Designed for power-over-fiber

• Applications include: Sensors requiring electrically isolated power, Electric utilities: Current sensing, Medical: MRI monitoring, Power electronics: Gate driver and Electric train: Current sensing

관련된 링크들