Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 190A, 13 kW

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Isolator Switches 열람하기

Subtotal (1 unit)*

₩109,999.50

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 7월 22일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩109,999.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
805-5581
제조사 부품 번호:
172876 P1-25/M4/SVB-SW
제조업체:
Eaton
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Eaton

Number of Poles

3

Product Type

Isolator Switch

Mount Type

Panel Mount

IP Rating

IP65

Electrical Phase

3

Handle Colour

Black

Switching Current

190A

Terminal Type

Screw

Auxiliary Contacts Available

No

Series

P1-25

Padlock Compatibility

No

Switching AC Voltage

230V ac

Minimum Operating Temperature

-25°C

Switching Power

13kW

Switching DC Voltage

60V dc

Maximum Operating Temperature

-25°C

Hazardous Area Certification

NO

Length

65mm

Width

460mm

Standards/Approvals

CSA, IEC, UL

Depth

65mm

제외

COO (Country of Origin):
GB

Eaton Non-Fused Switch Disconnectors - P1 Series Isolators With Metal Extension Shafts


The P1 series of switch disconnectors from Eaton is compact and robust. This range of isolator switches is suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.

With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.

With the metal extension shaft, the P1 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.

Features and Benefits


• Featuring extension shafts, the Eaton P1 switches can be mounted in electrical cabinets of up to 600mm deep, and offer a solution in many different applications due to the variety of handle and shaft options available.

• The Eaton P1 range of switch-disconnectors offers high performance and reliability paired with low power losses.

• Performs local isolation, manual override & safety switch functions.

• Switch-disconnectors have rated uninterrupted current from 13 - 32 A.

• P1 Series fit a standard front plate of 45 x 45 mm

• Shaft is metal to increase the robustness and durability of devices.

Uses and Applications


This range of isolator switches from Eaton is suitable for use in applications where there is a need to disconnect electrical equipment from the circuit. This form of local isolation is most commonly needed for the repair and maintenance of electrical equipment on the de-energised circuit. These disconnect switches can also be used as safety switches. Potential use in machine control panels.

What is the difference between a fused switch disconnector and a non-fused switch disconnector?


Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.

Note

Eaton formerly known as Moeller

관련된 링크들