Eaton 3-Pole Surface Isolator Switch -, IP65, 25A, 13 kW
- RS 제품 번호:
- 773-0638
- 제조사 부품 번호:
- 207294 P1-25/I2/SVB-SW
- 제조업체:
- Eaton
Subtotal (1 unit)*
₩117,039.00
재고있음
- 추가로 2026년 5월 28일 부터 11 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩117,039.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 773-0638
- 제조사 부품 번호:
- 207294 P1-25/I2/SVB-SW
- 제조업체:
- Eaton
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Eaton | |
| Number of Poles | 3 | |
| Product Type | Isolator Switch | |
| Mount Type | Surface | |
| IP Rating | IP65 | |
| Electrical Phase | 3 | |
| Handle Colour | Black | |
| Auxiliary Contacts Available | No | |
| Switching Current | 25A | |
| Series | P1-25 | |
| Terminal Type | Screw | |
| Padlock Compatibility | Yes | |
| Minimum Operating Temperature | -25°C | |
| Switching Power | 13kW | |
| Switching AC Voltage | 400V ac | |
| Switching DC Voltage | 60V dc | |
| Maximum Operating Temperature | 40°C | |
| Hazardous Area Certification | ATEX | |
| Standards/Approvals | VDE, EN, UL, ATEX, CSA, IEC | |
| Length | 160mm | |
| Width | 100mm | |
| Depth | 80mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 Eaton | ||
Number of Poles 3 | ||
Product Type Isolator Switch | ||
Mount Type Surface | ||
IP Rating IP65 | ||
Electrical Phase 3 | ||
Handle Colour Black | ||
Auxiliary Contacts Available No | ||
Switching Current 25A | ||
Series P1-25 | ||
Terminal Type Screw | ||
Padlock Compatibility Yes | ||
Minimum Operating Temperature -25°C | ||
Switching Power 13kW | ||
Switching AC Voltage 400V ac | ||
Switching DC Voltage 60V dc | ||
Maximum Operating Temperature 40°C | ||
Hazardous Area Certification ATEX | ||
Standards/Approvals VDE, EN, UL, ATEX, CSA, IEC | ||
Length 160mm | ||
Width 100mm | ||
Depth 80mm | ||
- COO (Country of Origin):
- GB
Eaton Enclosed Non-Fused Switch Disconnector – P1 Series
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.;Introducing the P1 range of enclosed switch disconnectors from Eaton. On these switches, the manual operator acts directly on the contacts, the contacts are positively opened on de-energisation. These switch disconnectors can be used as mains switches, maintenance switches and manual overrode switches.
Features & Benefits
• Thermoplastic enclosure
• Surface mounting
• Black rotary handle and locking ring
• Lockable in the 0 (Off) position
• IP65 ingress protection rating
• The perfect solution for installing as a safety measure
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.
Note
Eaton formerly known as Moeller
관련된 링크들
- Eaton 3-Pole Surface Isolator Switch -, IP65, 25A, 13 kW
- Eaton 3-Pole Surface Mount Isolator Switch -, IP65, 25A, 13 kW
- Eaton 3-Pole Flush Isolator Switch -, IP65, 25A, 13 kW
- Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 190A, 13 kW
- Eaton 3-Pole Surface Isolator Switch -, IP65, 190A, 13 kW
- Eaton 3-Pole Surface Mount Isolator Switch -, IP65, 190A, 13 kW
- Eaton 3-Pole Surface Non-Fused Isolator Switch -, IP65, 25A, 13 kW
- Eaton 3-Pole Surface Non-Fused Isolator Switch -, IP65, 25A, 12 kW