Eaton 3-Pole Surface Mount Isolator Switch -, IP65, 190A, 13 kW
- RS 제품 번호:
- 330-7944
- Distrelec 제품 번호:
- 135-11-928
- 제조사 부품 번호:
- 207293 P1-25/I2/SVB
- 제조업체:
- Eaton
Subtotal (1 unit)*
₩81,900.00
재고있음
- 94 개 단위 배송 준비 완료
- 추가로 2026년 6월 02일 부터 30 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩81,900.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 330-7944
- Distrelec 제품 번호:
- 135-11-928
- 제조사 부품 번호:
- 207293 P1-25/I2/SVB
- 제조업체:
- Eaton
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Eaton | |
| Number of Poles | 3 | |
| Product Type | Isolator Switch | |
| Mount Type | Surface Mount | |
| IP Rating | IP65 | |
| Electrical Phase | 3 | |
| Handle Colour | Red | |
| Terminal Type | Screw | |
| Series | P1-25 | |
| Switching Current | 190A | |
| Auxiliary Contacts Available | No | |
| Switching DC Voltage | 120V dc | |
| Padlock Compatibility | No | |
| Switching Power | 13kW | |
| Minimum Operating Temperature | -25°C | |
| Switching AC Voltage | 230V ac | |
| Maximum Operating Temperature | 40°C | |
| Hazardous Area Certification | NO | |
| Length | 180mm | |
| Width | 100mm | |
| Standards/Approvals | IEC, CSA, UL | |
| Depth | 115mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 Eaton | ||
Number of Poles 3 | ||
Product Type Isolator Switch | ||
Mount Type Surface Mount | ||
IP Rating IP65 | ||
Electrical Phase 3 | ||
Handle Colour Red | ||
Terminal Type Screw | ||
Series P1-25 | ||
Switching Current 190A | ||
Auxiliary Contacts Available No | ||
Switching DC Voltage 120V dc | ||
Padlock Compatibility No | ||
Switching Power 13kW | ||
Minimum Operating Temperature -25°C | ||
Switching AC Voltage 230V ac | ||
Maximum Operating Temperature 40°C | ||
Hazardous Area Certification NO | ||
Length 180mm | ||
Width 100mm | ||
Standards/Approvals IEC, CSA, UL | ||
Depth 115mm | ||
제외
Eaton Isolator Switch, Surface Mounting, 3 Poles - P1-25 Series - 207293 P1-25/I2/SVB
Use this 3-pole isolator switch from Eaton to safely shut down part of a circuit. It can function as a main switch, an emergency stop or a manual override, ensuring workers remain safe and sound while carrying out servicing and maintenance. To disconnect the power supply, rotate the red handle to the 'off' position. Then, to make sure it stays there, the yellow locking ring features three holes that you can insert padlocks into. This is a non-fused isolator, so to reconnect it you just turn the dial back to 'on'.
Features & Benefits
• IP65-rated casing keeps out dust and moisture for a long service life in tough industrial environments
• Compact size of 180 (L) x 100 (W) x 115mm (D), so it doesn't add unnecessary bulk to your setup
• Operating temperature range of -25°C to +50°C, meaning it copes well in challenging conditions
How do I connect the isolator switch to my system?
Mount the switch on a wall or other surface using the two screw fixings on the black casing. There are four M25 knockouts for wiring it into your appliance, two each at the top and bottom, so you can choose which suits you best.
Note
Eaton formerly known as Moeller
관련된 링크들
- Eaton 3-Pole Surface Isolator Switch -, IP65, 190A, 13 kW
- Eaton 3-Pole Surface Mount Isolator Switch -, IP65, 25A, 13 kW
- Eaton 3-Pole Surface Mount Isolator Switch -, IP65, 190A, 13 kW
- Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 190A, 13 kW
- Eaton 3-Pole Surface Mount Isolator Switch -, IP65, 260A, 15 kW
- Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 190A, 5.5 kW
- Eaton 3-Pole Surface Isolator Switch -, IP65
- Eaton 1-Pole Surface Isolator Switch -, IP65, 260A, 13 kW