제조사부품번호

Wurth Elektronik Openable, Diameter 6 mm Ferrite Sleeve, Apertures: 1 23.7 mm 18.2 mm 40.5 mm, For General Application,

RS 제품 번호:: 163-5428
제조사 부품 번호:: 74271112S
제조업체:: Wurth Elektronik

Wurth Elektronik Openable, Diameter 6 mm Ferrite Sleeve, Apertures: 1 23.7 mm 18.2 mm 40.5 mm, For General Application,

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 Box of 38 units)*

₩256,044.00

10,944 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	Per Box*
38 - 38	₩6,738.00	₩256,022.00
76 - 342	₩6,568.00	₩249,622.00
380 +	₩5,912.00	₩224,664.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 163-5428
제조사 부품 번호:: 74271112S
제조업체:: Wurth Elektronik

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Wurth Elektronik
	Series	WE-STAR TEC
	Sub Type	Snap Ferrite
	Product Type	Ferrite Sleeve
	Application	General Application, Safety Relevant Application
	Material	4W620
	Key	No
	Impedance at 25 MHz	175Ω
	Openable	Yes
	Impedance at 100 MHz	316Ω
	Aperture Diameter	6mm
	Number of Apertures	1
	External Depth	23.7mm
	External Height	18.2mm
	External Width	40.5mm
	Standards/Approvals	REACH, RoHS

	모두 선택
	브랜드 Wurth Elektronik
	Series WE-STAR TEC
	Sub Type Snap Ferrite
	Product Type Ferrite Sleeve
	Application General Application, Safety Relevant Application
	Material 4W620
	Key No
	Impedance at 25 MHz 175Ω
	Openable Yes
	Impedance at 100 MHz 316Ω
	Aperture Diameter 6mm
	Number of Apertures 1
	External Depth 23.7mm
	External Height 18.2mm
	External Width 40.5mm
	Standards/Approvals REACH, RoHS

Wurth Elektronik WE-STAR TEC Series Ferrite Sleeve, 175Ω Impedance at 25Mhz, 316Ω Impedance at 100MHz - 74271112S

This ferrite sleeve is an openable snap ferrite component intended to suppress high-frequency interference in both general and safety-relevant installations. It is manufactured from 4W620 material and designed to accept cables through a single 6mm aperture, allowing straightforward retrofitting and cable management in assemblies where EMI attenuation is required.

Features and Benefits:

• 175Ω impedance at 25MHz provides targeted low-frequency suppression
• 316Ω impedance at 100MHz enhances high-frequency attenuation
• Openable snap design allows Rapid installation on existing cables
• Single 6mm aperture supports typical signal and power conductors
• Complies with RoHS and REACH for material restriction adherence

Applications

• Suitable for attenuation on control signal wiring
• Ideal for use on power leads in safety circuits
• Used for noise reduction in sensor cable runs
• Can be used for retrofitting existing harnesses
• Suitable for general Electronic Assembly noise mitigation

What material is used for its magnetic properties?

It is produced from 4W620 ferrite material which provides the required permeability for EMI suppression.

How does the component mount around cables?

The unit is openable and snaps closed around a conductor using its split-body design for clamp-on installation.

What approvals relate to hazardous substances?

The device meets REACH and RoHS approvals restricting specific hazardous substances.

What external envelope should be allowed for panel layout?

Plan for an external footprint of approximately 40.5mm width by 23.7mm depth and 18.2mm height.