Festo EPCS-BS, 8118303 Micro Linear Actuator, 220mm/s, 400 mm

모든 Electric Linear Actuators 열람하기

Subtotal (1 unit)*

₩2,447,035.50

Add to Basket
수량 선택 또는 입력
재고있음
  • 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩2,447,035.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
216-6359
Distrelec 제품 번호:
301-86-951
제조사 부품 번호:
EPCS-BS-60-400-12P-A-ST-M-H1-PLK-AA
제조업체:
Festo
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Festo

Product Type

Micro Linear Actuator

Stroke Length

400mm

Maximum Speed

220mm/s

Series

EPCS-BS

Motor Technology

Stepper Motor

Duty Cycle

100%

IP Rating

IP40

Guide Type

Plain Bearing

Maximum Operating Temperature

50°C

Standards/Approvals

RoHS

COO (Country of Origin):
DE

Festo EPCS-BS Series Micro Linear Actuator, 400mm Stroke Length, IP40 - EPCS-BS-60-400-12P-A-ST-M-H1-PLK-AA, Numeric Part Number:8118303


This micro linear actuator provides controlled linear motion for automation and precision positioning tasks. Designed for continuous operation, it integrates a stepper motor drive and a plain bearing guide to deliver repeatable travel suitable for electrical, mechanical and electronics environments where regulated, programmable movement is required.

Features and Benefits:


• 100% duty cycle enables continuous operation under load
• Stepper motor delivers controlled motion at 220mm/s
• Plain bearing guide reduces friction for smooth travel
• IP40 protection suits indoor industrial installations
• Rated maximum temperature of 50°C supports warm environments
• Stroke length of 400mm provides extended linear travel

Applications


• Suitable for pick-and-place mechanisms in assembly lines
• Ideal for laboratory automation requiring precise travel
• Used for actuation in test rigs and inspection stations
• Can be used for positional control in panel-mounted equipment
• Used with control systems for repeatable component indexing

What supply voltage does it require for motor operation?


The actuator is specified for a 12V stepper configuration which matches common low-voltage control systems.

How does the guide type affect maintenance requirements?


The plain bearing guide minimises complexity and typically requires periodic lubrication rather than frequent part replacement.

Can it be installed in exposed outdoor locations?


With an IP40 rating it is intended for protected indoor use rather than outdoor or wet environments.

What thermal considerations affect placement inside enclosures?


The device is rated to operate up to 50°C, so enclosure ventilation or thermal management should prevent internal temperatures exceeding this limit.

Is it compliant with material restriction regulations?


The unit conforms to RoHS requirements concerning restricted substances.

관련된 링크들