Erem 676 ESD ESD Safe 780 μm Flush Tip Cutter
- RS 제품 번호:
- 240-0770
- Distrelec 제품 번호:
- 301-64-310
- 제조사 부품 번호:
- 676E
- 제조업체:
- Erem
Subtotal (1 unit)*
₩143,520.00
재고있음
- 19 개 단위 배송 준비 완료
- 추가로 다른 지역에서 3 개 단위 배송 준비 완료
- 추가로 2026년 11월 24일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩143,520.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 240-0770
- Distrelec 제품 번호:
- 301-64-310
- 제조사 부품 번호:
- 676E
- 제조업체:
- Erem
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Erem | |
| Product Type | Tip Cutter | |
| Sub Type | Tip Cutter | |
| Overall Length | 4.3in | |
| Jaw Length | 16mm | |
| VDE/1000V Approved | No | |
| Application | Microelectronic | |
| Height Safe | Yes | |
| Jaw Material | High Grade Tool Steel | |
| ESD Safe | Yes | |
| Standards/Approvals | UPC | |
| Maximum Cutting Capacity | 780μm | |
| Cut Type | Flush | |
| 모두 선택 | ||
|---|---|---|
브랜드 Erem | ||
Product Type Tip Cutter | ||
Sub Type Tip Cutter | ||
Overall Length 4.3in | ||
Jaw Length 16mm | ||
VDE/1000V Approved No | ||
Application Microelectronic | ||
Height Safe Yes | ||
Jaw Material High Grade Tool Steel | ||
ESD Safe Yes | ||
Standards/Approvals UPC | ||
Maximum Cutting Capacity 780μm | ||
Cut Type Flush | ||
Weller Tip Cutter, 16mm Jaw Length, 0.78mm Maximum Cutting Capacity - 676E
This tip cutter is designed for precision microelectronic work, offering antistatic handling and fine flush cutting for component leads. It is intended for technicians who require a compact, controlled cutting tool that performs in sensitive electronic environments while minimising material deformation at the cut face.
Features and Benefits:
• ESD‑safe construction reduces risk of static damage
• Flush cutting action delivers minimal lead stubs
• High‑grade tool steel jaws maintain cutting edge integrity
• Maximum cutting capacity 0.78mm handles common leads
• Jaw length 16mm provides focused access to tight areas
• UPC approval confirms standardised manufacturing compliance
• Flush cutting action delivers minimal lead stubs
• High‑grade tool steel jaws maintain cutting edge integrity
• Maximum cutting capacity 0.78mm handles common leads
• Jaw length 16mm provides focused access to tight areas
• UPC approval confirms standardised manufacturing compliance
Applications
• Suitable for trimming component leads during assembly
• Ideal for delicate soldering post‑cut clean‑up tasks
• Used with antistatic workstations and ESD benches
• Can be used for fine wire cutting in repair work
• Used for hobbyist microelectronic prototyping
• Ideal for delicate soldering post‑cut clean‑up tasks
• Used with antistatic workstations and ESD benches
• Can be used for fine wire cutting in repair work
• Used for hobbyist microelectronic prototyping
Is the tool safe to use around static‑sensitive devices?
Yes, it features ESD‑safe construction to reduce electrostatic discharge risk when working near sensitive components.
What materials and finish support long service life?
The cutting surfaces are formed from high‑grade tool steel to preserve sharpness under frequent use.
How precise are the cuts for close‑fit components?
The flush cutting geometry produces a very short residual tip, aiding close placement and rework without excess protrusion.
Can it access confined component placements effectively?
The relatively short jaw length concentrates the cutting point, allowing targeted access in restricted spaces.
관련된 링크들
- Weller Erem ESD Safe 780 μm Flush Tip Cutter
- Erem 676 ESD ESD Safe 1.2 mm Flush Side cutter
- Erem 504 ESD ESD Safe 1.29 mm Flush Tip Cutter
- Erem ESD Safe 600 μm Flush Tip Cutter
- Weller Erem ESD Safe 1.29 mm Flush Tip Cutter
- Weller Erem ESD Safe 1.2 mm Flush Tip Cutter
- Weller Erem ESD Safe 580 μm Flush Tip Cutter
- Weller Erem 670EP ESD Safe 600 μm Flush Tip Cutter
