Erem 504 ESD ESD Safe 1.29 mm Flush Tip Cutter
- RS 제품 번호:
- 240-0732
- Distrelec 제품 번호:
- 180-99-206
- 제조사 부품 번호:
- 504AE
- 제조업체:
- Erem
Subtotal (1 unit)*
₩202,860.00
일시적 품절
- 2026년 12월 14일 부터 20 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩202,860.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 240-0732
- Distrelec 제품 번호:
- 180-99-206
- 제조사 부품 번호:
- 504AE
- 제조업체:
- Erem
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Erem | |
| Product Type | Tip Cutter | |
| Sub Type | Tip Cutter | |
| Jaw Width | 11mm | |
| Overall Length | 4.3in | |
| Jaw Length | 20mm | |
| VDE/1000V Approved | No | |
| Height Safe | Yes | |
| Application | Microelectronic | |
| ESD Safe | Yes | |
| Jaw Material | High Grade Tool Steel | |
| Maximum Cutting Capacity | 1.29mm | |
| Standards/Approvals | UPC | |
| Cut Type | Flush | |
| 모두 선택 | ||
|---|---|---|
브랜드 Erem | ||
Product Type Tip Cutter | ||
Sub Type Tip Cutter | ||
Jaw Width 11mm | ||
Overall Length 4.3in | ||
Jaw Length 20mm | ||
VDE/1000V Approved No | ||
Height Safe Yes | ||
Application Microelectronic | ||
ESD Safe Yes | ||
Jaw Material High Grade Tool Steel | ||
Maximum Cutting Capacity 1.29mm | ||
Standards/Approvals UPC | ||
Cut Type Flush | ||
- COO (Country of Origin):
- CH
Weller Tip Cutter, 20mm Jaw Length, 1.29mm Maximum Cutting Capacity - 504AE
This tip cutter is designed for precision trimming of component leads in microelectronic work. It provides a compact cutting solution for users requiring careful, controlled flush cuts during assembly and repair tasks. The tool is built for routine workshop and bench use where electrostatic-sensitive handling and fine removal of protruding material are necessary.
Features and Benefits:
• ESD-safe construction reduces the risk of electrostatic discharge during handling
• Flush-cutting geometry produces near-surface trims for neat finishes
• Maximum cutting capacity 1.29mm handles most small leads
• High-grade tool steel jaws maintain edge retention under repeated use
• Compact 11mm jaw width enables access in confined areas
• Flush-cutting geometry produces near-surface trims for neat finishes
• Maximum cutting capacity 1.29mm handles most small leads
• High-grade tool steel jaws maintain edge retention under repeated use
• Compact 11mm jaw width enables access in confined areas
Applications
• Suitable for trimming component leads on densely populated boards
• Ideal for laboratory and bench-level microelectronic assembly
• Used with small through-hole components requiring a flush finish
• Can be used for detail work in precision repair operations
• Ideal for laboratory and bench-level microelectronic assembly
• Used with small through-hole components requiring a flush finish
• Can be used for detail work in precision repair operations
Is the tool safe for use with electrostatic-sensitive devices?
Yes, the construction prevents static build-up, enabling safe manipulation of sensitive components during cutting operations.
What material are the cutting surfaces made from and why does it matter?
The blades are manufactured from high-grade tool steel which offers enhanced hardness and wear resistance for sustained cutting performance.
How does the cutter cope with tight access points?
The relatively narrow jaw width combined with a compact overall form allows entry into restricted spaces for targeted trimming.
What standards or approvals accompany this tool?
It carries UPC approval, indicating conformity with the specified certification requirements.
관련된 링크들
- Erem 504 ESD ESD Safe Flush Oblique Cutter
- Weller Erem ESD Safe 1.29 mm Flush Tip Cutter
- Erem 2477 ESD ESD Safe 1.29 mm Flush Side cutter
- Weller Erem ESD Safe 1.29 mm Flush Side cutter
- Weller Erem ESD Safe 1 mm Flush Cable Cutter
- Erem 2476 ESD ESD Safe Flush Side cutter
- Erem 676 ESD ESD Safe 780 μm Flush Tip Cutter
- Erem 2412EW ESD ESD Safe Semi-Flush Side cutter
