Subtotal (1 unit)*
₩191,620.00
재고있음
- 6 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩191,620.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 240-0771
- 제조사 부품 번호:
- 676EW
- 제조업체:
- Erem
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Erem | |
| Product Type | Side cutter | |
| Sub Type | Side Cutter | |
| Jaw Width | 9mm | |
| Overall Length | 110mm | |
| Jaw Length | 16mm | |
| VDE/1000V Approved | No | |
| Height Safe | Yes | |
| Application | Microelectronic | |
| Jaw Material | High Grade Tool Steel | |
| ESD Safe | Yes | |
| Maximum Cutting Capacity | 1.2mm | |
| Standards/Approvals | RoHS | |
| Cut Type | Flush | |
| 모두 선택 | ||
|---|---|---|
브랜드 Erem | ||
Product Type Side cutter | ||
Sub Type Side Cutter | ||
Jaw Width 9mm | ||
Overall Length 110mm | ||
Jaw Length 16mm | ||
VDE/1000V Approved No | ||
Height Safe Yes | ||
Application Microelectronic | ||
Jaw Material High Grade Tool Steel | ||
ESD Safe Yes | ||
Maximum Cutting Capacity 1.2mm | ||
Standards/Approvals RoHS | ||
Cut Type Flush | ||
- COO (Country of Origin):
- CH
Weller Side cutter, 110mm Overall Length, 1.2mm Maximum Cutting Capacity - 676EW
This side cutter is a precision hand tool designed for controlled cutting and trimming in microelectronic and electronics work. It is electrostatic-discharge safe and intended for tasks requiring flush cuts on delicate components and wiring, offering suitable performance for technicians in automation, electrical and mechanical environments.
Features and Benefits:
• 1.2mm maximum cutting capacity for thin conductor work
• 16mm jaw length for precise access in confined areas
• High-grade tool steel jaws for sustained edge retention
• Flush-cut geometry for near-surface trimming of leads
• ESD-safe construction to limit static damage to components
• 16mm jaw length for precise access in confined areas
• High-grade tool steel jaws for sustained edge retention
• Flush-cut geometry for near-surface trimming of leads
• ESD-safe construction to limit static damage to components
Applications
• Suitable for trimming component leads on populated boards
• Ideal for cable and wire cutting in electronics assembly
• Used for precise snipping during automation sensor wiring
• Can be used for maintenance tasks in electrical control panels
• Ideal for cable and wire cutting in electronics assembly
• Used for precise snipping during automation sensor wiring
• Can be used for maintenance tasks in electrical control panels
Is the tool suitable for work with sensitive semiconductor devices?
Yes, its anti-static design reduces electrostatic discharge risk during handling of sensitive components.
How does the jaw material affect long-term performance?
The high-grade tool steel sustains sharpness and resists deformation under repeated light-duty cuts.
Will it provide a near-flat finish when cutting leads?
The flush-cut blade profile is configured to leave minimal protrusion when trimming component leads.
What length should users expect for handling and leverage?
The overall length measures 110 mm, providing Compact handling and adequate control for precision tasks.
관련된 링크들
- Erem 676 ESD Flush ESD Safe Tip Cutter
- Erem 2477 ESD Flush ESD Safe Side Cutter
- Erem 2432 ESD ESD Safe Super Full Flush Side cutter
- Erem Flush ESD Safe Side cutter
- Erem 2476 ESD Flush ESD Safe Side Cutter
- Erem 577 ESD ESD Safe Flush Side cutter
- Erem 522 ESD ESD Safe Flush Side cutter
- Erem 622 ESD ESD Safe Flush Side cutter