Weller Erem Flush ESD Safe Tip Cutter

모든 Cutters 열람하기

Subtotal (1 unit)*

₩166,140.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩166,140.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
245-0227
Distrelec 제품 번호:
180-54-192
제조사 부품 번호:
570E
제조업체:
Weller Erem
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Weller Erem

Product Type

Tip Cutter

Sub Type

Tip Cutter

Overall Length

120mm

Jaw Width

0.4in

Application

Microelectronic

ESD Safe

Yes

Jaw Material

High Grade Tool Steel

Maximum Cutting Capacity

1.2mm

Standards/Approvals

No

Cut Type

Flush

제외

COO (Country of Origin):
CH

Weller Tip Cutter, 120mm Overall Length, 1.2mm Maximum Cutting Capacity - 570E


This tip cutter is a precision tool designed for removing excess leads and trimming component leads in microelectronic work. It operates as a flush-cutting instrument suited to controlled environments and static-sensitive assembly areas, providing clean cuts for electronic components during soldering and rework tasks.

Features and Benefits:


• Flush-cutting action delivers neat, low-profile leads
• ESD-safe construction reduces electrostatic risk during handling
• High-grade tool steel jaws maintain edge retention
• Maximum 1.2mm cutting capacity for varied lead sizes
• 0.4 in jaw width for access into tight component arrays
• Overall length 120mm for reach and control in assemblies

Applications


• Suitable for trimming component leads after soldering operations
• Ideal for precision work in automation assembly stations
• Used with through-hole electronic components during prototyping
• Can be used for maintenance of electrical control modules
• Used for delicate mechanical assemblies requiring fine trimming

How does the tool minimise risk to sensitive circuitry?


Its ESD-safe construction prevents static discharge when working near sensitive components by reducing charge accumulation on the tool.

What material ensures the cutting edges remain effective?


The jaws are MADE from high-grade tool steel, providing hardness and wear resistance suited to repeated cuts on component leads.

What range of lead sizes can it handle reliably?


It is specified to cut materials up to 1.2mm diameter, covering most standard component lead thicknesses encountered in microelectronic assembly.

How does the jaw geometry aid access in dense boards?


The 0.4 in jaw width gives a narrow profile, allowing the cutting edges to reach between closely spaced pins and small components.

What handling characteristics support precision work?


At 120mm overall length the tool balances reach with control, enabling steady one-handed trimming during soldering and rework tasks.

관련된 링크들