Power Integrations, AC/DC Converter 1.2 A, 5V, 6 V 7-Pin, DIP LNK626PG

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 AC-DC Converters 열람하기
대량 구매 할인 기용 가능
View bulk pricing options

Subtotal (50 units, in tubes of 50)*

₩73,900.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 05일 부터 2,400 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
Per Tube*
50 - 50₩1,478.00₩73,920.00
100 - 150₩1,434.00₩71,720.00
200 +₩1,392.00₩69,560.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
146-2520
제조사 부품 번호:
LNK626PG
제조업체:
Power Integrations
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Power Integrations

Maximum Input Voltage

265V ac

Product Type

AC/DC Converter

Maximum Output Voltage

5V

Output Power

17W

Mount Type

Through Hole

Pin Count

7

Switching Frequency

100kHz

Maximum Output Current

1.2A

Package Type

DIP

Minimum Input Voltage

85V ac

Topology

Flyback

Maximum Duty Cycle

54%

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

150°C

Height

3.68mm

Standards/Approvals

No

Series

LinkSwitch-CV

Width

6.6mm

Length

9.83mm

Supply Current

600μA

Minimum Output Voltage

6V

Minimum Output Current

419mA

Automotive Standard

No

COO (Country of Origin):
CN

LinkSwitch-CV series Offline AC-DC Converters


Power Integrations LinkSwitch-CV family of energy-efficient, off-line switching AC-DC converters with accurate primary-side constant-voltage (CV) control. The LinkSwitch-CV series can significantly simplify the design of low power CV converters and eliminate the need for both an opto-coupler and secondary CV control circuitry while still providing excellent output voltage regulation. These highly integrated devices incorporate a 725V power MOSFET with on/off control state machine, self-biasing, frequency jittering, cycle-by-cycle current limit, and hysteretic thermal shutdown circuitry.

• Elimination of opto-coupler and all secondary CV control circuitry

• IC is self-biasing – no bias winding supply required

• Compensation for external component temperature variations

• Continuous and/or discontinuous mode operation for design flexibility

• Frequency jittering greatly reduces EMI filter cost

• Auto-restart protection reduces delivered power by >95% for output short-circuit and all control loop faults (open and shorted components)

• Hysteretic thermal shutdown with automatic recovery

• Meets HV creepage requirements between Drain and all other pins

• No primary or secondary current sense resistors

• No-load consumption <200 mW at 230 VAC and <70 mW with optional external bias

• Easily meets all global energy efficiency regulations with no added components

• ON/OFF control provides constant efficiency down to very light loads – Ideal for mandatory EISA and ENERGY STAR 2.0 regulations

AC-DC Converters, Power Integrations


관련된 링크들